<%@LANGUAGE="VBSCRIPT"%> ROCKCRAWLER.com: New Products From Advance Adapters
Advance Adapters
NEW PRODUCTS FROM ADVANCE ADAPTERS
PASO ROBLES, CA - The following are newly-released products from Advance Adapters.
32 Spline Rear Output Shaft for Jeep and Scout Dana 20
Part # 50-3020 will work on Jeep or Scout Dana 20 transfer cases. The kit will add 1.5" to the length of the transfer case. The new rear shaft eliminates the weaker 1-1/8" dia. 10 spline and replaces it with the ultra-strong 1-3/8" dia. 32 spline. As an added bonus, the kit allows the use of different speedometer pinions to compensate for larger tires or gear changes. It can be added during a rebuild with lower gears or as an upgrade to a stock case.
Advance Adapters
32 Spline Rear Output Shaft for Dana 300 Transfer Case
Part # 50-3034 will work on 1980-81 "short" style tailhousings on the Jeep Dana 300 and the 1979-80 Scout Dana 300. The kit will add 2" to the length of the transfer case. The new rear shaft eliminates the weaker 1-1/8" dia. 26 spline and replaces it with the ultra-strong 1-3/8" dia. 32 spline. As an added bonus, the kit allows the use of different speedometer pinions to compensate for larger tires or gear changes. It can be added during a rebuild with lower gears or as an upgrade to a stock case.
Advance Adapters
 #50-8604 Dana 300 Rotation Ring
The rotation ring allows four clocking positions for the Dana 300. A new longer input shaft is provided to maintain maximum spline engagement. This kit works on all Jeep Dana 300s with a 23 spline input.
 Advance Adapters
NV3550 V8 Conversion Bellhousing
Part # 712591 comes complete with bellhousing, clutch release lever, pilot bushing and master cylinder fitting. This kit is designed for Jeep TJs with the factory NV3550. It can also be used in conjunction with one of Advance Adapters NV3550 retrofit kits.
Advance Adapters
TJ Hydraulic Hose
Have you broken your plastic TJ hydraulic hose only to find out that you can't get the hose alone without purchasing the master and slave cylinders? Advance Adapters INC is here to help. We offer a braided- steel-flex hose and fittings to adapt to your master and slave cylinders. Part # 716130H is the hose, and part # 716130-TJ is the pin-type TJ fitting (two required).
 Advance Adapters
Harmonic Balancer Kit for 4.0L Jeep Engine
The kit relocates the timing sensor from the bellhousing to the front of the engine at the harmonic balancer. This is needed when adapting transmissions such as the 700R4, TH350, or TH400 to the 4.0L engine. Kit # 716012 is for 1991-2001 4.0L engines. Kits include the balancer, bracket, and sensor.
Advance Adapters
Ford ZF Transmission Adapter for Bronco Dana 20
Kit # 50-4303 includes a new spud shaft and alignment retainer. The adapter is 1.5" long and utilizes the existing bolt pattern on the back of the ZF.
 Advance Adapters
Ford ZF Ttransmission Adapter for Jeep 300
Kit # 50-9925 includes a new input shaft and spacer adapter. The adapter is 1.5" long and utilizes the existing bolt pattern on the back of the ZF.
Advance Adapters

Contact Advance Adapters, Inc:
www.advanceadapters.com
4320 Aerotech Center Way
Paso Robles, California 93446
Phone:805-238-7000 (Toll Free:800-350-2223)
Fax:805-238-4201

©2002 Rockcrawler 4x4 and Off-Road Magazine. All Rights Reserved