Avon , Ohio – Design Engineering, Inc. (DEI) a leading aftermarket supplier of heat control products to the motorsports and automotive enthusiast markets now offers one of the most effective means to improve an engine’s cooling efficiency, and with it, improve performance.
DEI Radiator Relief™ (p/n 040104) is a proven coolant additive that provides up to 30 degrees reduction in engine operating temperatures, and 50% quicker warm-up time-a benefit for those cold morning start ups. Radiator Relief™ is compatible with water and all types of anti-freeze products, plus block sealants, leak-stop products and other cooling system additives. It is compatible with all metals: aluminum, brass, iron, magnesium and steel.
The unique physical properties of DEI Radiator Relief™ provides these benefits. Radiator Relief™ has a viscosity 33 percent less than water, reducing the resistance to heat transfer. This allows the heat of combustion to move from the cylinder heads and cylinder bores into the coolant with less resistance where the encapsulated heat is released to the core tubes quicker when it reaches the radiator. Since Radiator Relief™ is thinner than water or anti-freeze products, it thins the overall mixture and allows the coolant to flow more freely throughout the system.
A single 32-fluid ounce (1 qt/945 ml) bottle of Radiator Relief™ will treat a 15-qt (14.175 L) cooling system. Remove a quart of coolant from the cooling system and replace with Radiator Relief™. No pre-mixing or other preparations are required.
DEI Radiator Relief™ is for all internal combustion engines, for street, commercial and competition use and is for use in all climates. And because it is 100% biodegradable, non-corrosive and non-toxic, DEI Radiator Relief™ is an environmental safe product.
For more information on DEI Radiator Relief™ and other DEI thermal tuning products, visit www.designengineering.com, or call 800-264-9472 or email: sales@DesignEngineering.com