Vehicle Classifieds

Started out as a 1985 Toyota SR-5 XTRA CAB 4x4 See link for photos: http://s1175.photobucket.com/user/Dirtypower1960/slideshow/ Chassis: 118" wheelbase White 1985 Toyota SR-5 XTRA CAB 4x4 Engine: Chevy 350 Howell Fuel Injection with Wire Harness Flat Top Pistons Comp Camshafts Aluminum radiator w/ dual SPAL 14" Electric Fans Aluminum Fuel Cell Transmission: 700R Tranny Cooler w/ 9" Fan B&M Shifter Transfer Case: Marlin Crawler Dual Case Kit with the 4:70:1 Gear, 23 Spline Drive Shafts: Tom Woods Front Tom Woods Rear 3" Tube 1350 Joint w/CV Front Axle: GM Dana 60 35 Spline 4340 Axles w/733 U-Joints Yukon 5.13 Ring and Pinion Yukon Locker Yukon Hardcore Locking Hubs 35 Spline Heavy Duty Differential Cover Rear Axle: GM 14 Bolt...
2000 Jeep Cherokee Sport 4dr 4x4 for sale: 240,000 km 5-speed manual tranny No rust New A/C compressor 2014 New front coils 2015 Oil changed every 7,000 km (every spring and fall) New Sony radio and speakers Winter tires and steel wheels included No rust, extremely clean inside All maintenance bills available Mileage 90% highway Original owner, more photos available by email.
As title. Looking for something ready to go. Get travel to . Got around a grand to spend for the right car ---------------------------------------------------------------------------------- How should it feel for Chinese tourists bringing home MADE IN CHINA souvenirs from any country they visit...
91' Samurai, has the 03 Suzuki 2.0 (127hp) FI motor swap with Header, TH 180 Automatic Transmission, Ballistic transfer case mount, 6 to 1 Transfer case gears, Aluminum Fab Dash w/Autometer Ultralite gauges, Dana 44's Front & Back with ARB Air lockers and on-board compressor, 4.56 Gears, 10 Gallon stainless fuel cell, Full roll cage, aftermarket bumpers front & back, Rock Sliders, removable steering wheel, Hydro Steering, fabbed inner quarters in rear, Beadlocked wheels with 36x12.50x15 Super Swapers, new CD Player & Kicker 6.5" speakers, Warn headlights, Racing seats with Impact 5 point harnesses, new Rough Country N2.0 nitrogen shocks, Jeep Eater YJ suspension conversion, new Warn Premium hubs, 9000lb winch, and im sure im leaving out...
I'm new to the rock crawling scene, and have ran across this 2002 TJ doing some trading in it and need knowledgeable opinions on what it's worth. Any help would be appreciated! Thanks Its a point and shoot TJ that you can drive 70mph to the trail, beat on it all day then drive home. The full hydro takes some getting use to on the road but its never bothered me. I dont have a rear seat but I built the cage with head room for one if you wanted to move the cell and swag racks. Under the skin its more like a buggy with the engine cage tied to the fenders, grill hoop, rockers. The cage is tied to the frame and rockers in 8 spots as well. 2002, 44k miles. 4.0. 3 speed auto. -StaK 3 speed monster box. -dana 60. ARBs. All Yukon 35 spline...
wish to sell to any person who will rebuild it,repaint it,and keep it on the road where it belongs. i need a down payment on a small house in town.i retired and cant finish the project. it runs good, needs tlc and and a good home the asking price is $16,998 cash or trade Upload pictures The systems forces to wait. Probably my error...will be update later More detail PM me with your number nha copo
For Sale: the 4491 (4493 last year) Ultra4 Unlimited Class car $55,000 AZ car, 2nd owner, "driven gently only on weekends", low mileage. But oh those miles are AWESOME miles! Less than approx 15 hours since motor was built. Top 10 King of the Hammers (2014) Top 20 King of the Hammers (2013) 4th Place Ultra4 West Series (2014) 8th Place Ultra4 National Points (2014) 5th in Class NORRA 1000 (Baja, Mexico 2014) Consistent / multiple Dirt Riot wins, Top 10s at Glen Helen and Tooele, UT and the list goes on. This is a proven car. The buggy is for sale and includes Parker Pumper, Window Nets, Spare Tires, Race Harnesses, the works. Everything is included except the helmet and fire suit, GPS, and radios. The buggy is also still...
105'' wheel base 2 seater 4.3 vortec bored 60 over -cpi injected hi-flow spider -hughes racing turbo 350 trans. input shaft and clutch upgrades - single transfer case /Toyota gear drive with marlin shafts 4.7 and twin stick shifters 8'' Toyota axles with six shooter knuckles ,arp studs chromoly drive flanges -longfield axles ,Detroit lockers - g-2 , 5:29 gears - rear trailgear disc brake kit -braided brake lines . 4 link front and rear full hydro steering -single ended ram . 13.50 39.5 x 17'' iroks on allied bead lock wheels . art carr shifter corbau seats5 point harness's -16'' fox air shocks -front and rear suck down winches with synthetic rope foam filled fuel cell 18 gallon . weighs 3340 lbs. 74'' wide with spacers .smooth skid...
This is a 1947 Willys cj2a jeep done over. Too much to list, but alot of good stuff. Mid 80s 302 small block v8 completely rebuilt by Ace Altenators,(thing sounds like a race motor)with maybe 150 miles on it,c4 tranny, lockered front and back, 5.38 gears, on board welder, brand new never used Warn winch, Dana 44 axles, 35″ tires. Custom dash. A little TLC never hurts. Im an open book kinda guy, so it has a tranny leak when not installed back properly but absolutely nothing wrong with tranny. Need to get rid of for home renovation. Great jeep and great for modifying even more!$13,800 OBO. Make me an offer Im open to them! Thanks for looking!
Corvette fuel injected motor Auqa aluminum tub Atlas transfer case 60 front 14 bolt rear 4 link suspension front & rear (built by professional off road shop) Coil overs, Fox shocks, bump stops Fuel cell w/rack V air (on board air) Ron Davis radiator w/dual fans Frame mounted roll cage Suspension seats w/belts Hi lift jack 40" tires bead locks 8274 Warn winch w/synthetic rope Currie anti-rock sway bars front & rear 513 gears Detroit lockers PSC hydraulic steering fresh build, needs nothing Call 812-707-3133 for more information or additional pictures $32,500 OBO
This is a nice project jeep that I have invested twice that asking price, it is just becoming painfully obvious that I just don't have the time to work on it. 1946 Willys CJ2A with Dana 44 front and rear axles from a Wagoneer. The tub is in very good condition, only a small hole in the driver's side floor board, could easily be fixed, I have purchased (but not installed) new pans to weld in for both sides, Those will come with. New soft top, never installed. Nice custom made roll cage. For the running gear, I have a low mile Chevy Vortek V-6 from a 2000 Blazer and the Automatic transmission, which has already been mated to a Dana 300 transfer case via an advance adapter. 5 point seats, Tilt steering wheel with key!, Gobs of extra...
POLARIS XP1000 CUSTOM SINGLE SEATER *****************VERY LIGHT AND VERY FAST********* **************POLARIS 4 WHEEL DRIVE AND REVERSE********************** ALL POLARIS PARTS AND FRAME GEOMETRY, SPECIFICATIONS. LIGHT WEIGHT STRONG ALL CROMOLLY FRAME NEW XP1000 MOTOR WITH ONLY 12 HOURS All New complete Axles, Hubs, Rotors, Brake calipers, Pads, Bearings. CUSTOM CROMOLLY ADJUSTABLE FRONT A-ARMS MOTORSPORT BEEDLOCK 14 WHEELS NEW DIRTCOMMANDER 14/9 TIRES NEW FOX PODUIM SHOCKS or Stock 8 GALLON JAZ FUEL CELL DIRTY DOG CLUTCH KIT CUSTOM BILLET FUEL PUMP HOLDER ASSEMBLY JAZ FAST FILL DRYBREAK SYSTEM SPARCO RACING SEAT FRESH AIR SYSTEM POWER STEERING MOMO STEERING WHEEL RATH SWAY BAR ON BOARD FUEL SAFE FIRE SYSTEM RIDGID LIGHTS Muzzys Gen 4...
Where to start... 2001 White Tacoma 2.7 contributed to by Central Coast 4WDrive in Santa Cruz California (gears, bearings, etc.), JJ's Fabrication in Davenport California (axles, brakes, tubing) and Earnie's Service Center in Felton, California (engine overhaul). 4160 pounds and 25k minimum of project nearing completion. 3/4 ton true track front and rear. Custom bed with specialty front and real extra-wide panels. 488 gears, rebuilt engine and 3rz supercharger, K&N performance Kit, both rebuilt at 89,812k. Current odometer 94,300, shipped from CA to New Mexico on flatbed. New Ball joints, new link bars, springs. Parking brake line lock. Ballistic front shocks, warn 9.5 cgi winch fits front and back with remote, optima battery. Pioneer...
Drivetrain: 02 GM 5.3 with Jim's Performance harness and tune. Has truck intake, oil pan, and accessory drive. Custom headers and 2.5" exhaust with a single Magnaflow muffler. TH 400 transmission with stock converter.... reverse valve body so it will hold first gear at any rpm. Clocked and Twin Sticked 205. 1350 yokes. Axles: -Front is a Chevy LP 60 with Dodge external style hubs. 5:13 Gears and welded carrier. Have 35 spline Chrome Moly inners and outers. 2x3 3/16" wall box tubing truss. 6" stroke DE ram with 3/4 heims on tie rods. BTF diff cover and 1350 yoke. -Rear is a 14 Bolt with BTF diff cover and brake brackets with 3/4 ton rotors and calipers. 5:13 Gears and Detroit Locker. Also has a 2x3 3/16" truss 1350 yoke. Chassis...
4 door lifted, fully loaded from Jeep, 5 speed, no accidents, some scratches (as usual), Original owner and I have done the modifications through a qualified garage and by myself, tow package and trailer brakes, soft top and hard tops included, 145,000 km only. Asking $30,000 CDN. Total of additional parts added to the vehicle is $27,798.61 I have been to Moab several times, and you can view my Jeep on trails with the crew from Rebel Off Road Easter Jeep safari 2014.They have helped me build and service my Jeep. Also I have made a video on You Tube of my Jeep for viewing: https://www.youtube.com/channel/UCh_ZS3VUw1L_2mojEGTup5g Special features as follows to those who know about off road products: * King Shock conversion...
Hey Rockcrawler.com community, just wanted to post this here for a bit more exposure to some folks that may be interested in my CJ-7 crawler that I am selling. I will part it out, but only after I sell the axles which are a big part of the price. All the details below, glad to answer any questions. Some preliminary pricing can be found on the jeepforum posting here. Asking $13,500 Thanks for looking! More Pics: 83 CJ-7 Selling my well built CJ-7. This is not set up as a daily driver, this is a pure off-road rig. The Atlas II, driveshafts, and Prorock 60's have less than 150 miles on them. The 4.0 HO and the AW-4 came from a '91 XJ with 83k on it. Most work has been professionally done / fabbed on this jeep by High Country...

Members online

No members online now.
Back
Top Bottom