Home Forum Swag and Sales Event Photos Sponsors Home

Archive for Axle/Differential

Longfield T-Case Output Flanges Back In Stock

Thursday, September 18th, 2014

100085 1 KIT 220x146 Longfield T Case Output Flanges Back In StockThe Longfield T-Case Output Shaft is made from aerospace-grade 4340 chromoly steel making

this output shaft 70% stronger than the OEM output shaft. The Longfield T-Case Output Shaft

was specifically designed as a direct drop-in OEM replacement, so you don’t have to use a

custom machined tail housing or special bearings and seals that are never in stock. We are

so confident in this product that we are offering our legendary No Questions Asked Lifetime

warranty.

Type Torque at Failure

Toyota OEM 2,687 ft-lbs

Longfield 4,573 ft-lbs

Application Data:

• 1979-1995 Toyota Pickup & 4Runner (RF1A Gear Driven T-Case)

Made in the USA

Longfield T-Case Output Shaft, 100085-1-KIT, $250.95

       New Heavy-Duty Axles Engineered For Extreme Off-Road and Street Duty

Alloy USA Rear Axle Shaft with background High Res 220x146 ALLOY USA INTRODUCES LINE OF PERFORMANCE REAR AXLE SHAFTS FOR JEEP, DODGE, FORD, GM AND INTERNATIONAL APPLICATIONSSuwanee, Ga. (August 19, 2014) Alloy USA®, a manufacturer of performance drivetrain products, today introduced its line of heavy-duty rear axle shafts for Jeep®, Dodge, Ford, International and GM cars and trucks.

Alloy USA’s axles are designed, engineered and tested to hold up to the toughest abuse, whether fitted to a high-performance car or truck cruising highways, running down drag strips, over back roads or conquering the world’s roughest off-road terrain. Read More→

Comments (0)

Six New Ratios Satisfy a Wide Range of Demands On- and Off-Road

Alloy USA Ring Pinion Set for Jeep JK Wranger High Res 220x146 ALLOY USA ANNOUNCES PERFORMANCE RING AND PINION SETS FOR JK JEEPSSuwanee, Ga. (May 6, 2014) – Alloy USA®, a manufacturer of performance drivetrain products, including gears and high-strength axle shafts, has announced the availability of a wide range of ring and pinion sets for Jeep® JK Wranglers (2007 – 2014).

Available in 3.73, 4.10, 4.56, 4.88, 5.13 and 5.38 ratios, Alloy USA’s gear sets are made to last. Each set is constructed from high quality 8620 steel forgings and uses Gleason gear cutting technology for unsurpassed precision. Complete installation kits are available separately to complete the job.  Read More→

Comments (0)

ARB: Unlock Your 4×4’s Potential with Air Lockers

Tuesday, February 25th, 2014

Discover how ARB Air Lockers will enhance the traction of your 4×4 in any terrain. Designed, engineered and manufactured in Australia. ARB Air Lockers provide the ultimate in traction, control and performance. Now with a five year, unlimited mile warranty across the range.

We are happy to release this new video, as it is the perfect introduction to the purpose and function of the Air Locker product line.

Comments (0)
Categories : Axle/Differential
Tags :

PML Ram diff cover 220x220 Ram 2500 & 3500 Trucks Can Have Extra Capacity and  Clearance with New PML Front CoverInglewood, CA – PML designed an extra capacity cover for the front differentials on 2003 to 2012 Ram 2500 and Ram 3500 trucks. This cover is a bolt on replacement for the stock cover on the American Axle Manufacturing (AAM) 9 1/4 inch ring gear differential used in these trucks.

Because of many clearance problems with steering, U-bolts, and suspension , PML maintained a low profile with partial fins with this cover. Starting in about 2008, Dodge added a U-bolt to the front end design that would contact larger aftermarket covers when at the limit of the steering. This U-bolt was retrofitted on early year trucks during service visits. The suspension on Megacabs would also contact a larger cover when the truck was loaded. PML designed this cover to avoid these problems. Read More→

Clayton Off Road High Steer System

Tuesday, January 28th, 2014

Clayton Off Road High Steer Kit 220x133 Clayton Off Road High Steer SystemThe all new high steer system from Clayton Off Road is the only complete system that transforms your stock Jeep front axle and allows you to run a crossover high steer system with larger brakes & calipers, and improved ground clearance. Designed to work with high and low pinion Dana 30 and Dana 44 front ends, this kit will work with MJ, XJ, ZJ, TJ, and LJ factory axles. Read More→

Comments (0)

RS7000MT Stabilizer CMYK 220x32 Rancho® RS7000MT™ Steering Stabilizer Coverage Expanded to Include 1950 and Newer Chevy, GMC Trucks and SUVsLong Beach, Calif., Dec. 17, 2013 – The Rancho line of performance suspension and shocks now includes additional RS7000MT steering stabilizer series coverage of 1950 and newer Chevrolet and GMC truck and SUV models. The latest Rancho RS7000MT steering stabilizers are now available at performance retailers nationwide.

Built with core RS7000MT monotube series technology, RS7000MT steering stabilizers help provide ride and handling characteristics that are ideal for off-road driving or towing. Monotube technology included in RS7000MT steering stabilizers allows for quick dissipation of heat from use and helps to protect the shock from overheating and failure during extreme use. Read More→

Comments (0)
Categories : Axle/Differential

Trail Gear – NEW Double Shear Steering Bracket Kit

Monday, December 16th, 2013

Trail Gear NEW Double Shear Steering Bracket Kit 209x220 Trail Gear   NEW Double Shear Steering Bracket KitStrengthen your steering system and protect against wallowed out steering arms. This new kit from Trail Gear allows the heims of a fully hydraulic steering system to be mounted in double shear. This will ensure the longest possible life for your steering arms. Brackets are CNC laser cut and formed from 1/4” A36 steel. This kit contains parts to upgrade both left-hand and right-hand steering, and will fit on Trail Gear 4-stud and 6 stud steering arms. Read More→

Comments (0)
Categories : Axle/Differential
Tags :

Trail-Gear Samurai Super Metal Knuckle Bolt Kit

Wednesday, November 20th, 2013

Trail Gear Samurai knuckle bolt kit 220x162 Trail Gear Samurai Super Metal Knuckle Bolt KitNeed replacement bolts for your knuckle, but want a stronger bolt? This Trail-Gear Samurai Super Metal Knuckle Bolt Kit is exactly what you are looking for. Our Super Metal Knuckle Bolts will replace your damaged, rusted, or missing Kingpin/Knuckle bolts. These bolts are 40% stronger than stock and exceed Class 12.9 strength requirements. In just a few minutes, you can have your bolts upgraded to make your rig more trail worthy. Read More→

Comments (0)