Archive for Aftermarket – Page 2

  • Slotted mounting  bolt end holes allow easy installation without removing header flanges or exhaust manifolds
  • Made from .125-inch “dead soft” aluminum layers that compresses 50-percent
  • Conforms to and seals imperfections on header flanges and exhaust manifolds
  • Lifetime guarantee not to shrink, deteriorate or blowout

Mr Gasket Dead Soft Aluminum Collector Gasket 7420G Hi Res 220x165 MR. GASKET INTRODUCES NEW “DEAD SOFT” ALUMINUM EXHAUST GASKETSCLEVELAND (August 7, 2014) – Mr. Gasket, a performance automotive parts and accessories manufacturer celebrating its 50th anniversary this year, today announced the availability of its new “Dead Soft” Aluminum Exhaust and Collector Gaskets for a variety of Ford, Chevy, Mopar, Pontiac and AMC applications.

Each of the aluminum gaskets are engineered to provide superior sealing capability, high heat resistance and easy installation. Made from “dead soft” aluminum layer’s , they can compress to half their original thickness – from .125-inches to .060-inches – creating a tight, leak-proof seal that conforms to exhaust mounting surfaces with surface irregularities and warpage. Read More→

Comments (0)

Nitto Exo Grappler All Weather Tire

Tuesday, August 19th, 2014

Nitto Tire’s new Exo Grappler AWT delivers year-round traction for your truck or SUV off road and on road

Nitto Exo Grappler AWT Sidewall 1 220x169 Nitto Exo Grappler All Weather TireFast Facts:

  • Superior traction in dirt, rock, gravel, snow and ice.
  • Three Peak Mountain Snowflake winter rated.
  • Two unique sidewall designs let you customize the look of your truck or SUV.

Cypress, Calif. (July 31, 2014) – Four wheeling is all about enjoying the freedom to go anywhere, at anytime. But even with the wide range of capabilities that today’s off-road tires possess, the ability to deliver traction in any weather, including ice and snow, is not usually one of them. Now, Nitto Tire U.S.A. Inc., a leading manufacturer of off-road and street performance tires, has announced that it has added a new tire to its popular Grappler series that really is a true all-weather tire – the Exo Grappler AWT. Read More→

Comments (0)
Categories : Tire/Wheel

EIBACH ALL-TERRAIN-LIFT JEEP WRANGLER JK

Tuesday, August 19th, 2014

EIBACH ALL TERRAIN LIFT JEEP WRANGLER JK 220x172 EIBACH ALL TERRAIN LIFT JEEP WRANGLER JKEibach has captured countless victories in some of the greatest off-road races in the world. Take that same race-winning technology, combine it with Eibach’s legendary suspension tuning and enter: the ALL-TERRAIN-LIFT. Built to withstand anything you can throw at it, the ALL-TERRAIN-LIFT is the perfect balance of off-road performance with on-road stability and ride quality.

The Eibach ALL-TERRAIN-LIFT Kit comes complete with everything needed for installation, Including: Eibach ALL-TERRAIN-LIFT Springs, Shocks, Bumpstop Spacers, Adjustable Endlinks, Adjustable Front/Rear Track Bars, Location Brackets and Stainless-Steel Brake Lines—backed with Eibach’s Million-Mile Spring Warranty, Two-Year Shock Warranty and Made in the U.S.A. Read More→

Comments (0)

arb drawer 220x146 Jeep JK Unlimited   ARB Roller Drawer & Roller Floor Storage Solution With seating for 5 and outstanding rugged performance, the JK Jeep Wrangler Unlimited (4-door) is a capable vehicle on and off road. It gives owners plenty to smile about but throws up some challenges when considering storage. In order to make the most of the JK’s cargo area and maximize storage and flexibility of use, a new roller drawer module has been developed. The RDRF790 incorporates a single Roller Drawer and an integrated Roller Floor top. The design allows for plenty of accessible and secure storage in the drawer.  While the roller drawer function is self-explanatory, the roller floor provides easy access to a Fridge Freezer or other gear. The 37 quart ARB Fridge Freezer (10800352) can be mounted in the traditional front to back orientation. Although a tight fit, a 50 quart ARB Fridge Freezer (10800472) can be oriented left to right across the drawer and rolled rearwards for easier access. Read More→

Comments (0)

                         2014 GM 1500 3.75″ Combo Kit

kitpiczoom 220x146 Rough Country : 3.25 and 3.75 Chevy Combo Kits 07 14Get the best of both worlds with Rough Country’s 3.75″ Combo Kit for 2014 GM 1500’s! This unique kit combines our popular 2.5″ Leveling Lift Kit with our 1 1/2″ body lift, offering you a big boost at an incredible price! 

Gain enough ride height to run up to 285/75 R 17 tires with a set of lower strut extensions, rear blocks, and a set of fiberglass reinforced nylon spacers. Best of all this kit ships with a set of bumper relocation brackets and instruction for lifting the rear bumper using factory mounts, giving your truck a clean, flush look after lifting. Includes a Lifetime Replacement Warranty and is certified FMVSS no. 126 Compliant, proven not to interfere with Electronic Stability Control feature on new model trucks.  Read More→

Comments (0)

WK2 Grand Cherokee ARB 220x146 New Old Man Emu Suspension for Jeep Grand Cherokee WK2 (2011 & On)Determining the right solution for your vehicle and your requirements demands special attention to many factors. Unlike numerous aftermarket suspension systems, which are only available in a single configuration targeting lift height, Old Man Emu (OME) now offers a range of tuned and matched integrated suspension systems engineered specifically for the Jeep Grand Cherokee WK2. This ensures the right suspension is available to suit how the vehicle is outfitted and the conditions it will encounter. This full line of suspension options will cover the range of builds from lightly built and stock vehicles up to those with 660 lbs. of constant weight being fitted. New Old Man Emu Suspension for Jeep Grand Cherokee WK2 (2011 & On) Read More→

Comments (0)

Two New Lift Kits from Superlift Suspension

Friday, June 20th, 2014

Superlift 6” Lift Kit for 2009-2014 Ford F-150 4WD

Available with Superide, or Superide SS by Bilstein Rear Shocks

SEI40023 220x220 Two New Lift Kits from Superlift SuspensionSuperlift’s 6″ lift kit for 2009-2014 Ford F150 4WD trucks achieves front lift by installing spacers on top of the factory front strut / coil spring assemblies, eliminating time consuming strut disassembly. The factory upper control arms are retained and remain in their original location, while the factory lower control arms and axle housing are lowered, in relation to the frame. New Superlift replacement steering knuckles made of cast ductile iron, and machined in-house by Superlift, span the increased distance between the control arms without increasing track width. A billet front driveshaft spacer ensures proper driveshaft engagement and length; brake hose extensions are also supplied.
Superlift’s geometry, from steering timing and linkage angles, to driveshaft and CV axle operating angles, yields optimal component service life and exceptional drivability.

Read More→

Direct O.E. Replacement Steel Bodies Are a Convenient Way to Restore Rusted or Damaged 1981-86 Jeeps

Omix ADA Jeep CJ 8 Steel Body Tub High Res 220x115 Omix ADA Announces Officially Licensed Reproduction Jeep CJ 8 Body TubsOmix-ADA’s new tubs are officially licensed as authentic MOPAR restoration products and come embossed with the authorized Jeep logo. Each tub arrives pre-assembled; fitted and welded together with the cowl panel, rear wheel housings, floor, dash panel and glove box already in place, just like it came from the factory, retaining all major factory mounting locations and channels for body mounting.Suwanee, Ga. (June 3, 2014) – Omix-ADA®, a leading manufacturer of high quality Jeep®, truck and off-road accessories, today announced the availability of new replacement steel body tubs for the 1981-86 Jeep CJ-8/Scrambler.

Constructed from high-quality 18-gauge-steel in the front and rear floor panels, Omix-ADA’s CJ8 bodies also feature heavier 16-gauge-steel construction for all side and tail panels. Read More→

Comments (0)
Categories : Aftermarket

ICON 2007-UP Jeep JK 4.5″ Suspension Systems

Friday, June 20th, 2014

jeep jk suspension lift stage 1 220x220 ICON 2007 UP Jeep JK 4.5 Suspension SystemsICON Vehicle Dynamics is proud to announce the 2007 to current Jeep Wrangler JK 4.5” suspension system line up. Hours of development on the computer, on the lift, on the shock dyno, in the desert, and on the trails and slick rock of Moab have resulted in what ICON believes to be the best suspension systems on the market for the Jeep JK. While the ability to flex and the delivery of a soft ride tend to be a focus with lift kits, ICON’s 4.5” Suspension System aims to strike a perfect balance between wheel travel, articulation, ground clearance, and precise on and off-road handling characteristics. With these goals met, ICON-equipped JK’s can take on rolling desert whoops at upwards of 50 miles per hour, crawl over obstacle-riddled trails, and drive back home in comfort all in the same day. Read More→

chevy gmc 2500hd 3500 0 3 leveling system stage 2 220x220 ICON 2011+ GM 2500HD / 3500 Suspension System Update

 ICON Vehicle Dynamics has re-staged our 2011-Current Chevrolet & GMC 2500/3500 HD suspension systems. After long-term ride testing and tuning, ICON feels the front 2.0 shocks are unable to provide a quality riding system both on and off-road without being overworked prematurely. ICON 2011+ GM 2500HD / 3500 Suspension System Update

Read More→

MaxTrac Releases Dodge Ram 2WD 6-Inch Lift Kit

Wednesday, June 18th, 2014

MaxTrac Announces New 6-Inch Lift Kit For 2003-2008 2WD Dodge Ram 2500/3500

MT DodgeHD6inK 220x140 MaxTrac Releases Dodge Ram 2WD 6 Inch Lift KitAnaheim, Calif. — With the prices of 4×4 trucks skyrocketing over the past few years, the traditional truck owner has gone back to the basics by purchasing a 2WD truck to get the job done. But what he had to sacrifice is being able to personalize his truck by lifting it along with larger wheels and tires. Well, that’s not the case any more.

MaxTrac Suspension offers a lower-cost alternative for 2WD owners to achieve the same look as 4x4s without breaking the bank. The company’s newest lift system for 2003-2008 Dodge Ram 2WD HD trucks affordably increases ground clearance. Read More→

05300 angle nogrill 220x220 PIAA INTRODUCES LED REPLACEMENT LIGHT KITS FOR TOYOTA TUNDRA; LAMPS MOUNT IN OE BUMPER LOCATIONPortland, OR, June 9, 2014 – PIAA has introduced two new kits for mounting LP530 LED lights in 2014 and 2015 Toyota Tundra pickup trucks. These kits allow for the installation of PIAA’s LP530 LED lights, and feature the Reflector Facing Technology (RFT) that PIAA pioneered. The LP530 lights come in either 20° driving pattern, or 70° SAE-compliant fog pattern.

Each kit includes all the parts needed to install a pair of PIAA’s LP530 LED driving lamps (kit is part number 5362) or LP530 LED SAE fog lamps (part number 5360). Each kit includes a pair of PIAA LP530 driving or fog lamps, 2 mounting brackets, wiring harness, and mounting hardware, along with simple installation instructions. MSRP for each kit is just $379.00. Read More→

Comments (0)