Archive for Press Release – Page 3

Longfield T-Case Output Flanges Back In Stock

Thursday, September 18th, 2014

100085 1 KIT 220x146 Longfield T Case Output Flanges Back In StockThe Longfield T-Case Output Shaft is made from aerospace-grade 4340 chromoly steel making

this output shaft 70% stronger than the OEM output shaft. The Longfield T-Case Output Shaft

was specifically designed as a direct drop-in OEM replacement, so you don’t have to use a

custom machined tail housing or special bearings and seals that are never in stock. We are

so confident in this product that we are offering our legendary No Questions Asked Lifetime

warranty.

Type Torque at Failure

Toyota OEM 2,687 ft-lbs

Longfield 4,573 ft-lbs

Application Data:

• 1979-1995 Toyota Pickup & 4Runner (RF1A Gear Driven T-Case)

Made in the USA

Longfield T-Case Output Shaft, 100085-1-KIT, $250.95

Founders Award Trophy 108x220 Bushwacker Founder’s Award to Recognize Truck/SUV Builder’s Passion and DedicationPortland, OR (8/27/14) — Bushwacker, Inc., a manufacturer of exterior truck and automotive accessories, will be presenting its inaugural Founder’s Award at the 2014 SEMA Show in Las Vegas on November 6 at 3:00pm in the Bushwacker booth (#30017) in Las Vegas Convention Center’s South Hall. Read More→

Comments (0)

ICON 2005-UP Toyota Hilux Suspension Systems

Tuesday, September 16th, 2014

5ea8daf9 791d 4873 b522 507a0b13fbdc 220x146 ICON 2005 UP Toyota Hilux Suspension SystemsAlthough many think the Hilux is more or less similar to a Tacoma it is, in fact, a very different vehicle. The frame is very stout, and the rear suspension is designed for quite a bit more load and service than a Tacoma. These differences prompted an approach to this international chassis that was quite different than the USDM counterpart. In standard fashion, ICON engineers took an all-encompassing approach and addressed the Hilux’s suspension as a whole rather than focusing on one particular component. The result of this is a dramatic increase in wheel travel and damping ability, translating into outstanding vehicle control and ride quality both on and off-road. Read More→

302882 3 KIT 220x176 Trail Gear is now offering 4.24 T Case Gears for your Sidekick, Vitara, and Geo/Chevy TrackerIf you plan on taking your rig down the toughest trails, lower transfer case gears are essential. Nothing worse than hitting the trail and not having enough power to push your oversized tires. Our Trail-Creeper 4.24:1 T-Case Gears is just what you need! Our Trail-Creeper 4.24:1 T-Case Gears are constructed out of high quality materials for superior strength and to take the punishment that any trail has to offer. These gears provide a 135% low range reduction from the stock 1.8:1 gears giving you the power and control needed to conquer the most difficult of obstacles. The Trail-Creeper 4.24 T-Case Gears will also include input and output seals.

 

Why buy Trail-Gear 4.24 Gears?

• High Quality Materials

• Precision fitting spline fit for long life

• 135% gear reduction for more power and control on the trail

A full-color set of instructions is also included in this kit! This is the only full set of instructions out

there on the market for the 4.24 gears.

Note: Clearancing inside your t-case is required for installation

Application Data:

• 1991-1998 Suzuki Sidekick 4WD

• 1991-2001 Geo Tracker 4WD

• 1991-2001 Chevy Tracker 4WD

• 1995-1997 Suzuki x90 4WD

• 1999-2001 Suzuki Vitara 4WD

Trail-Creeper 4.24 T-Case Gears, 302882-3-KIT, $576.45

piaa RF series LED group 220x220 PIAA ANNOUNCES IMMEDIATE AVAILABILITY OF NEW RF SERIES LED LIGHT BARSPortland, OR, August 19, 2014 – Following an extensive evaluation period in which samples were submitted to race teams and selected customers for feedback, PIAA’s new RF Series LED light bars are now in stock and available for immediate shipment from PIAA warehouse distributors. These exciting new high-tech light bars feature bold low-profile styling and advanced technical features that make them
unlike any other light bars on the market. Read More→

       New Heavy-Duty Axles Engineered For Extreme Off-Road and Street Duty

Alloy USA Rear Axle Shaft with background High Res 220x146 ALLOY USA INTRODUCES LINE OF PERFORMANCE REAR AXLE SHAFTS FOR JEEP, DODGE, FORD, GM AND INTERNATIONAL APPLICATIONSSuwanee, Ga. (August 19, 2014) Alloy USA®, a manufacturer of performance drivetrain products, today introduced its line of heavy-duty rear axle shafts for Jeep®, Dodge, Ford, International and GM cars and trucks.

Alloy USA’s axles are designed, engineered and tested to hold up to the toughest abuse, whether fitted to a high-performance car or truck cruising highways, running down drag strips, over back roads or conquering the world’s roughest off-road terrain. Read More→

Comments (0)

Allied Wheel Components and Raceline Wheels has expanded to a NEW Location in Mesa, Arizona for your convenience.

7424 S. Atwood Mesa, AZ 85212

Operating Hours:

Monday – Friday
8:00 AM – 5:00 PM
Contact Information:

Santee, CA (July 16th, 2014) – MasterCraft Safety, Inc. a solely owned corporation based in Santee, CA, announces the merger of Impact and MasterCraft Safety, Inc. to form Impact Racing, Inc. The newly formed California Corporation is part of a continuing strategy to provide increases in manufacturing efficiencies and customer service. “By consolidating our manufacturing efforts we will be better positioned to meet the needs of our ever increasing and loyal customer base. We will continue our 40 year tradition of providing high quality MADE IN THE USA, safety products to our Recreational Motorsports, Professional Motorsports and our country’s Military Defense Personnel” stated Robbie Pierce, CEO of Impact Racing, Inc. Read More→

Rugged Ridge Jeep JK Inverted Drag Link product only High Res 220x220 RUGGED RIDGE’S NEW INVERTED DRAG LINK FOR ’07 ’14 JK WRANGLERS RESTORES STEERING GEOMETRY ON LIFTED JEEPSSuwanee, Ga. (July 22, 2014) – Rugged Ridge®, a manufacturer of Jeep® off-road accessories and suspension kits, today introduced its new inverted drag link for 2007-2014 Jeep JK Wranglers. Specially designed to fix steering geometry issues that plague lifted Jeeps, the new design reduces bump steer and increases ground clearance; keeping vital steering components out of the way from rocks and other obstacles on the trail.

Jeep’s original design has the drag link mounted from the bottom of the passenger side steering knuckle, leaving the drag link especially vulnerable to trail damage. Using Rugged Ridge’s new design, owners drill out the original steering knuckle mounting hole and relocate the new inverted drag link over the top of the knuckle using a connecting sleeve, gaining precious ground clearance. Read More→

Comments (0)
  • Slotted mounting  bolt end holes allow easy installation without removing header flanges or exhaust manifolds
  • Made from .125-inch “dead soft” aluminum layers that compresses 50-percent
  • Conforms to and seals imperfections on header flanges and exhaust manifolds
  • Lifetime guarantee not to shrink, deteriorate or blowout

Mr Gasket Dead Soft Aluminum Collector Gasket 7420G Hi Res 220x165 MR. GASKET INTRODUCES NEW “DEAD SOFT” ALUMINUM EXHAUST GASKETSCLEVELAND (August 7, 2014) – Mr. Gasket, a performance automotive parts and accessories manufacturer celebrating its 50th anniversary this year, today announced the availability of its new “Dead Soft” Aluminum Exhaust and Collector Gaskets for a variety of Ford, Chevy, Mopar, Pontiac and AMC applications.

Each of the aluminum gaskets are engineered to provide superior sealing capability, high heat resistance and easy installation. Made from “dead soft” aluminum layer’s , they can compress to half their original thickness – from .125-inches to .060-inches – creating a tight, leak-proof seal that conforms to exhaust mounting surfaces with surface irregularities and warpage. Read More→

Comments (0)

Nitto Exo Grappler All Weather Tire

Tuesday, August 19th, 2014

Nitto Tire’s new Exo Grappler AWT delivers year-round traction for your truck or SUV off road and on road

Nitto Exo Grappler AWT Sidewall 1 220x169 Nitto Exo Grappler All Weather TireFast Facts:

  • Superior traction in dirt, rock, gravel, snow and ice.
  • Three Peak Mountain Snowflake winter rated.
  • Two unique sidewall designs let you customize the look of your truck or SUV.

Cypress, Calif. (July 31, 2014) – Four wheeling is all about enjoying the freedom to go anywhere, at anytime. But even with the wide range of capabilities that today’s off-road tires possess, the ability to deliver traction in any weather, including ice and snow, is not usually one of them. Now, Nitto Tire U.S.A. Inc., a leading manufacturer of off-road and street performance tires, has announced that it has added a new tire to its popular Grappler series that really is a true all-weather tire – the Exo Grappler AWT. Read More→

Comments (0)
Categories : Tire/Wheel

Innovative Spring Mechanism Offers Same Functionality Found in Newer 4-Door JKs Making Opening and Closing the Soft Top an Easy, One-Person Job

Rugged Ridge Jeep Soft Top Spring Assist Installed High Res 220x146 Rugged Ridge Announces Soft Top Spring Assist for 07 12 JK Wrangler UnlimitedSuwanee, Ga. (August 5, 2014) –  Rugged Ridge® today announced the availability of its new Soft Top Spring Assist Kit for the 2007-2012 Jeep® JK Wrangler Unlimited 4-door models.

Spring assisted opening and closing is already a feature found on the 2013-2014 Wranglers from the factory; Rugged Ridge’s new retrofit kit brings the same convenience to owners of older Jeeps. Designed to work with Jeep’s factory frame components, the new JK Soft Top Spring Assist kit is relatively easily installed and seamlessly integrates into the soft top as well as other aftermarket factory replacement tops on the market. Read More→