Archive for Nissan Xterra

NEW ARB AIR LOCKER, RD181

Wednesday, February 1st, 2012

Nissan Xterra, Frontier & Pathfinder

FEATURES:

The RD181 incorporates the latest 2-piece Air Locker design features including:

  • Patented ‘timed’ locking mechanism offers high strength and ultra fast unlocking (#1, #3 & #15).
  • Steel reinforced, elastomer bonded annular seal, designed to handle the most extreme climatic temperatures on earth (#2).
  • Comprehensive photo illustration installation and service guides.
  • Patented 2 piece design offers a range of interchangeable side gears (sold separately) to integrate with non-standard axle splines.

HD MM D22 2 150x150 RUGGED ROCKS, LLC RELEASES XTERRA / FRONTIER 3.3L V6 HD MOTOR MOUNTSThe days of ripping your stock motor mounts in half will be behind you.  These heavy duty motor mounts are made of 3/16″ steel; powder coated in ‘gunmetal gray’ and utilize a polyurethane bushing. Priced at $84.95, Rugged Rocks HD Motor Mounts for your 1998 – 2004 Xterra or Frontier are sold individually and are available at Ruggedrocks.com.

Rugged Rocks caters to the off road Nissan 4×4 enthusiasts.

For more information visit Http://RuggedRocks.com or call (909) 547-4651.

CONTACT:    Rugged Rocks, LLC
(909) 547-4651
http://ruggedrocks.com/

DOUG THORLEY EXHAUST HEADERS FOR 1998- 2004 3.3L V6 NISSAN XTERRA AND FRONTIER AVAILABLE THROUGH RUGGED ROCKS, LLC

nissan xterra frontier exhaust headers 150x150 Rugged Rocks: Nissan Xterra & Frontier Headers by Doug ThorleyFONTANA, Calif. – Not only will the new headers replace factory exhaust manifolds which are notorious for cracking and leaking, but by replacing the cracked manifold with these headers you will save some cash and increase performance.

Available exclusively from Rugged Rocks, LLC, Doug Thorley Exhaust Headers for the 1998 – 2004 3.3L V6 Nissan Xterra/Frontier are available for supercharged and non-supercharged motors. Replaces factory exhaust manifolds and primary cats, and reasonably priced at $456.95, these long tube headers are ceramic coated inside and out, with o2 bungs in place, ERG bung in place, and also include hardware for a full bolt on installation. Not CA smog legal, for off-road use only. Read More→

nissan xterra frontier 33l long tube headers DOUG THORLEY EXHAUST HEADERS FOR 1998  2004 3.3L V6 NISSAN  XTERRA AND FRONTIER RELEASED EXCLUSIVELY THROUGH RUGGED  ROCKS, LLC SOUTH LAKE TAHOE, Calif. – Not only will the new headers replace factory exhaust manifolds which are notorious for cracking and leaking, but by replacing the cracked manifold with these headers you will save some cash and increase performance.

Available exclusively from Rugged Rocks, LLC, Doug Thorley Exhaust Headers for the 1998 – 2004 3.3L V6 Nissan
Xterra/Frontier are available for supercharged and nonsupercharged motors. Replaces factory exhaust manifolds and primary cats, and reasonably priced at $456.95, these long tube headers are ceramic coated inside and out, with o2 bungs in place, ERG bung in place, and also include hardware for a full bolt on installation. Not CA smog legal, for off-road use only.
Doug Thorley products are known for their American built products, the ease of fitment, and easy installation.
Rugged Rocks caters to the off roading Nissan 4×4 enthusiasts. For more information contact Genevieve Rojas at Genevieve@ruggedrocks.com , visit RuggedRocks.com or call (909) 547-4651.

2010 06 Centerforce 300x225 NEW DUAL FRICTION CLUTCH ASSEMBLY FOR 2000 2004 NISSAN XTERRA AND 2004 NISSAN FRONTIER SUPERCHARGED 3.3L VG33ER ENGINECenterforce® is proud to introduce this New Dual Friction clutch assembly for the 2000-2004 Nissan Xterra and 2004 Nissan Frontier with the supercharged 3.3L VG33ER Engine. This new clutch assembly replaces the stock pressure plate with a more reliable assembly with a higher holding capacity that is designed as a direct bolt in for perfect fit and function. Centerforce strives to provide the best products on the market at any performance level by using patented processes and constantly testing different materials and designs to find the best combination. This new application is now available as a Dual Friction® clutch assembly for use in high torque performance applications. The Dual Friction part number is DF633500 (Pressure Plate and Disc Included). Also available is the Centerforce II assembly as part number CFT633500 (Pressure Plate and Disc Included). Read More→
Comments (0)