Archive for Toyota Tundra

Longfield T-Case Output Flanges Back In Stock

Thursday, September 18th, 2014

100085 1 KIT 220x146 Longfield T Case Output Flanges Back In StockThe Longfield T-Case Output Shaft is made from aerospace-grade 4340 chromoly steel making

this output shaft 70% stronger than the OEM output shaft. The Longfield T-Case Output Shaft

was specifically designed as a direct drop-in OEM replacement, so you don’t have to use a

custom machined tail housing or special bearings and seals that are never in stock. We are

so confident in this product that we are offering our legendary No Questions Asked Lifetime

warranty.

Type Torque at Failure

Toyota OEM 2,687 ft-lbs

Longfield 4,573 ft-lbs

Application Data:

• 1979-1995 Toyota Pickup & 4Runner (RF1A Gear Driven T-Case)

Made in the USA

Longfield T-Case Output Shaft, 100085-1-KIT, $250.95

05300 angle nogrill 220x220 PIAA INTRODUCES LED REPLACEMENT LIGHT KITS FOR TOYOTA TUNDRA; LAMPS MOUNT IN OE BUMPER LOCATIONPortland, OR, June 9, 2014 – PIAA has introduced two new kits for mounting LP530 LED lights in 2014 and 2015 Toyota Tundra pickup trucks. These kits allow for the installation of PIAA’s LP530 LED lights, and feature the Reflector Facing Technology (RFT) that PIAA pioneered. The LP530 lights come in either 20° driving pattern, or 70° SAE-compliant fog pattern.

Each kit includes all the parts needed to install a pair of PIAA’s LP530 LED driving lamps (kit is part number 5362) or LP530 LED SAE fog lamps (part number 5360). Each kit includes a pair of PIAA LP530 driving or fog lamps, 2 mounting brackets, wiring harness, and mounting hardware, along with simple installation instructions. MSRP for each kit is just $379.00. Read More→

Comments (0)

Optional MaxTrac Suspension Components Can Create 6 Inches Of Total Lift

MT Tundra 189x220 MaxTrac Releases 3.5 Lift Spindles For Toyota TundrasAnaheim, Calif. — MaxTrac Suspension has new 3.5-inch lift spindles for 2007-2013 Toyota Tundras. These spindles make the factory-raked 2WD Tundra’s front end an inch higher than its rear for a desert pre-runner look and/or to compensate for a heavy winch and bumper. The MaxTrac front spindles clear up to 33-inch-tall tires (minor fenderwell modifications might be required, depending on tire width and wheel backspacing). Read More→

Comments (0)

TeamLucas 220x120 Toyota Expands Motorsports & TV agreement with Team Lucas for 5th Year CORONA, Calif. (Feb. 19, 2013) -Toyota has renewed its agreement with Team Lucas to be the presenting sponsor of the CBS Sports Spectacular for 12 one-hour network television broadcasts and have the Toyota Tundra as the Official Truck of the Lucas Oil Off Road Racing Series for the 2013 season.

Toyota’s power block on the CBS Sports Spectacular features many of the Team Lucas series racing portfolio: the Lucas Oil Late Model Dirt Series, Lucas Oil Off Road Racing Series, Lucas Oil Drag Boat Series and Lucas Oil Pro Pulling League. Read More→

2011 04 AD TundraBar 300x225 Ansani Designs Announces Toyota Tundra Light BarFor 2007-current Tundras, Ansani Designs now offers a bolt-on light bar. It’s made with 1/4-inch-thick upright plates and 2 x .120-inch round tubing. The bar has three tabs with 1/2-inch holes and clearance for 8-inch round lights (KC Rally 800s shown, sold separately). The Tundra Light Bar is finished in gloss black powdercoat. Installation is bolt-on, using existing holes.

For more information, contact Ansani Designs, 480-584-6292,motorsports@ansanidesigns.com,www.ansanidesigns.com.

>Web 2.0 Release

Ansani Designs On Facebook

Comments (0)

Toyota 10.5″ 36 Spline ARB Air Locker

Monday, January 24th, 2011

TO SUIT 2007 On Toyota Tundra Rear w/5.7 Liter Engine

141 Toyota 10.5 36 Spline ARB Air LockerSpecifications:

  • 36 spline axle
  • 1.44″ (36.8mm) axle shaft diameter (outside of splines)
  • 12 bolt ring gear
  • 6.57″ (167mm) dia. ring gear ID
  • 10.5″ (267mm) dia. ring gear OD

Features:

  • Patented ‘timed’ locking mechanism offers high strength and ultra fast un-locking
  • Comprehensive photo illustrated installation and service guides
  • Steel reinforced, elastomer bonded annular seal designed to handle the most extreme climatic temperatures on earth
  • Patented 2 piece design offers a range of interchangeable side gears (sold separately) to integrate with non-standard axle shaft splines

Availability Date: Now

Comments (0)