RockCrawler.com

Category: Aftermarket

  • ICON 2007-UP GM 1500 Suspension Systems

    ICON 2007-UP GM 1500 Suspension Systems

    FITS ALUMINUM & STEEL SUSPENSION MODELS

    4ICON Vehicle Dynamics’ 2007-UP GM 1500 1-3” suspension systems are designed to dramatically increase the on and off-road ride quality of Chevy Silverado and GMC Sierra pickups. With wheel travel and ride quality in mind, ICON engineers researched each component of the GM platform’s suspension and addressed any areas where performance could be extracted. After this initial step, an array of products including coilovers, rear shocks, and upper control arms were developed and put to the test in varying terrain and extreme conditions. Once these products had seen many miles of on and off-road abuse without failure, they were organized into several stages that deliver unique levels of performance to the vehicle. (more…)

  • Longfield T-Case Output Flanges Back In Stock

    Longfield T-Case Output Flanges Back In Stock

    100085-1-KITThe Longfield T-Case Output Shaft is made from aerospace-grade 4340 chromoly steel making

    this output shaft 70% stronger than the OEM output shaft. The Longfield T-Case Output Shaft

    was specifically designed as a direct drop-in OEM replacement, so you don’t have to use a

    custom machined tail housing or special bearings and seals that are never in stock. We are

    so confident in this product that we are offering our legendary No Questions Asked Lifetime

    warranty.

    Type Torque at Failure

    Toyota OEM 2,687 ft-lbs

    Longfield 4,573 ft-lbs

    Application Data:

    • 1979-1995 Toyota Pickup & 4Runner (RF1A Gear Driven T-Case)

    Made in the USA

    Longfield T-Case Output Shaft, 100085-1-KIT, $250.95

  • ICON 2005-UP Toyota Hilux Suspension Systems

    5ea8daf9-791d-4873-b522-507a0b13fbdcAlthough many think the Hilux is more or less similar to a Tacoma it is, in fact, a very different vehicle. The frame is very stout, and the rear suspension is designed for quite a bit more load and service than a Tacoma. These differences prompted an approach to this international chassis that was quite different than the USDM counterpart. In standard fashion, ICON engineers took an all-encompassing approach and addressed the Hilux’s suspension as a whole rather than focusing on one particular component. The result of this is a dramatic increase in wheel travel and damping ability, translating into outstanding vehicle control and ride quality both on and off-road. (more…)

  • Trail-Gear is now offering 4.24 T-Case Gears for your Sidekick, Vitara, and Geo/Chevy Tracker

    Trail-Gear is now offering 4.24 T-Case Gears for your Sidekick, Vitara, and Geo/Chevy Tracker

    302882-3-KITIf you plan on taking your rig down the toughest trails, lower transfer case gears are essential. Nothing worse than hitting the trail and not having enough power to push your oversized tires. Our Trail-Creeper 4.24:1 T-Case Gears is just what you need! Our Trail-Creeper 4.24:1 T-Case Gears are constructed out of high quality materials for superior strength and to take the punishment that any trail has to offer. These gears provide a 135% low range reduction from the stock 1.8:1 gears giving you the power and control needed to conquer the most difficult of obstacles. The Trail-Creeper 4.24 T-Case Gears will also include input and output seals.

     

    Why buy Trail-Gear 4.24 Gears?

    • High Quality Materials

    • Precision fitting spline fit for long life

    • 135% gear reduction for more power and control on the trail

    A full-color set of instructions is also included in this kit! This is the only full set of instructions out

    there on the market for the 4.24 gears.

    Note: Clearancing inside your t-case is required for installation

    Application Data:

    • 1991-1998 Suzuki Sidekick 4WD

    • 1991-2001 Geo Tracker 4WD

    • 1991-2001 Chevy Tracker 4WD

    • 1995-1997 Suzuki x90 4WD

    • 1999-2001 Suzuki Vitara 4WD

    Trail-Creeper 4.24 T-Case Gears, 302882-3-KIT, $576.45

  • PIAA ANNOUNCES IMMEDIATE AVAILABILITY OF NEW RF SERIES LED LIGHT BARS

    PIAA ANNOUNCES IMMEDIATE AVAILABILITY OF NEW RF SERIES LED LIGHT BARS

    piaa-RF-series-LED-groupPortland, OR, August 19, 2014 – Following an extensive evaluation period in which samples were submitted to race teams and selected customers for feedback, PIAA’s new RF Series LED light bars are now in stock and available for immediate shipment from PIAA warehouse distributors. These exciting new high-tech light bars feature bold low-profile styling and advanced technical features that make them
    unlike any other light bars on the market. (more…)

  • ALLOY USA INTRODUCES LINE OF PERFORMANCE REAR AXLE SHAFTS FOR JEEP, DODGE, FORD, GM AND INTERNATIONAL APPLICATIONS

    ALLOY USA INTRODUCES LINE OF PERFORMANCE REAR AXLE SHAFTS FOR JEEP, DODGE, FORD, GM AND INTERNATIONAL APPLICATIONS

           New Heavy-Duty Axles Engineered For Extreme Off-Road and Street Duty

    Alloy USA Rear Axle Shaft - with background (High Res)Suwanee, Ga. (August 19, 2014) – Alloy USA®, a manufacturer of performance drivetrain products, today introduced its line of heavy-duty rear axle shafts for Jeep®, Dodge, Ford, International and GM cars and trucks.

    Alloy USA’s axles are designed, engineered and tested to hold up to the toughest abuse, whether fitted to a high-performance car or truck cruising highways, running down drag strips, over back roads or conquering the world’s roughest off-road terrain. (more…)