Category: Press Release

  • Superchips Announces First to Market

    2010 Ford F-150 Raptor SVT 5.4L Vehicle Coverage

    Sanford, FL – For over 26 years of performance tuning, Superchips has been known for dominating other tuning companies with a do-it-the-right-way attitude. Now you can add the highly anticipated 2010 Ford Raptor SVT to the list of impressive Superchips efforts.

    The Ford Gas Flashpaq (part no. 1865) and Ford Cortex (part no. 1950) deliver Superchips tuning for impressive horsepower and torque to the wheels, but it’s the improved drivability and performance that have owners excited.

    The enthusiast’s most loved Raptor is now even more exciting with two available performance tunes and a towing tune file for heavy load applications. The Raptor out-of-the-box tuning includes many advanced features while also working with most aftermarket cat-back free-flowing exhaust systems and air filter systems.

    The performance tune provides enhanced throttle response and shift adjustments, optimized shift firmness, raise rev limiter and noticeable drivability improvements. The gains are substantial with the Superchips 91-Octane performance tune serving up to 33 max horsepower and 36 lb-ft of max torque when equipped. The trucks gain up to 28 max horsepower and 31 lb-ft of max torque when equipped with Superchips 87-Octane performance tune.

    Advanced features include the ability to calibrate for tire heights from 28.00” – 38.00”, calibrate for axle gears from 3.08 – 5.13, and raise the speed and rev limiter.

    Superchips tuners include many useful features including working as a diagnostic scan tool, real-time in-cabin vehicle sensor display, vehicle performance data logger for 0 – 60 and ¼ miles times, recalibrate for tire diameter and axle gear changes, recalibrate for transfer case gear changes, adjust cooling fan settings and real-time idle up for running accessories. Cortex also includes an exclusive limited 2-year powertrain warranty.

    Superchips has the number one engine and model coverage in the industry offering a complete line of hand-held programmers for most late-model cars, trucks, and SUVs including: Ford, GM, Chrysler/Dodge, Nissan/Infiniti and Jeep. All Superchips programmers are available for purchase in retail stores and online wherever automotive performance products and accessories are sold.

  • Snap-on Expands ¾”Flank Drive Heavy Duty Impact Socket Offerings

    KENOSHA, Wis. – February 2, 2010 – Looking for some new heavy duty sockets to make your job a little easier? Snap-on has expanded the number of heavy duty 3/4” Flank Drive® impact sockets it offers by providing almost 50 new sockets that are sure to make those tough jobs much simpler.

    “When we talk with service technicians, we always get great feedback.  Heavy duty techs told us they needed a larger variety of impact sockets,” said Scott Amundson, product manager for Snap-on.  “With the added number of heavy duty 3/4” Flank Drive® impact sockets combined with our existing part numbers, I know Snap-on has the most complete offering of impact sockets anywhere.”

    Snap-on heavy duty 3/4” Flank Drive® impact sockets are heat-treated to optimize impact service life with a lower hardness than hand sockets and are able to withstand repeated cycling loads of impact wrenches. Applications include repair of heavy duty trucks and off-road equipment.

    “Snap-on uses a proprietary blend of special alloy socket steel that provides long life and superior strength,” continued Amundson.  “In addition, our Flank Drive® wrenching system delivers up to 20 percent more turning power without slipping or rounding while exceeding ANSI performance standards.”

    Customers can learn more about the Snap-on heavy duty 3/4” Flank Drive® impact sockets by contacting their participating Snap-on franchisee, visiting www.snapon.com or calling toll free 877-SNAPON-2 (877-762-7662).

    About Snap-on Tools

    Snap-on Tools is a subsidiary of Snap-on Incorporated, a leading global innovator, manufacturer and marketer of tools, diagnostics and equipment solutions for professional users. Product lines include hand and power tools, tool storage, diagnostics software, information and management systems, shop equipment and other solutions which are used by technicians and professionals at vehicle dealerships and repair centers and in the marine, powersports and aviation industries.  Snap-on Tools is one of the largest non-food franchise companies in the world, selling its products through more than 4,500 franchisees worldwide and through company-direct sales and over the Internet. Snap-on Incorporated, which was founded in 1920, is a $2.9 billion, S&P 500 company located in Kenosha, Wis. with operations throughout the world.  For additional information, visit www.snapon.com.

  • 2010 Griffin King of the Hammers DownTown HammerTown

    JOHNSON VALLEY, CA, FEBRUARY 1, 2010: DownTown HammerTown has been laid out and is amazing! The chalk is on the ground and now we are waiting for the tents to be erected and the semi’s to arrive. It is truly a city on the lakebed!

    There are over 80 vendors that will line the rows and fill the big 100×120 circus tent. They range from vendors just showing their products, to massive outfits that have parts on sell for you to take advantage of. You will just about be able to buy anything from nuts and bolts, t-shirts and hats, to some large bolt on items that you can purchase and walk out to install. The best part of the Vendor show is you don’t have to wait to use your newest gadget! You can use it that day!

    The tent that you won’t miss is the King of the Hammers general store. There you will find all the 2010 merchandise and programs. These programs will make you successful during the week at the 2010 Griffin King of the Hammers. It has the schedule of events, the drivers and numbers, the course maps and some great articles about the history of the King of the Hammers.

    There are a number of manufactures that have stepped up to help out with any needs that may arise over the week. There will be multiple shock support rigs here including King, Fox and Bilstein. Torchmate CNC Cutting Systems has offered their services to cut anything that you need right on the lakebed. ReadyWelder will have a welder that drivers can use to tack up a recent break. 4 Wheel Parts will have their semi out with a large assortment of items, but they will also be able to special order you products that will be delivered to the lake bed the next morning. Butch’s Speed shop and PCI Radios will be on site to take care of your last minute racing needs. So don’t worry if something happens while you’re out there, our team of support vendors are there to lend a hand.

    Traxxas is building an RC track that will be utilized for the Pro Driver race on Tuesday night and for anyone that brings their RC cars to play with during the week. RC4WD will also have a rock pile inside the main tent to test their cars.

    Tinaz Tacos and Funnel Cake will be out here the whole week to keep our tummies happy. Don’t worry, Tinaz Tacos serves other dinner items for all of you wanting to eat there all week. And if a hot cooked meal is not what you are looking for, there will be ice, snacks and dry package goods available at New Image 4×4.

    We encourage you to stop by the Land Use Emporium where all the land use groups have bound together and united. It is important that as 4 wheelers we all work together to participate with these groups. Some will be doing raffles and others will just be handing out valuable information.

    DownTown HammerTown will be where all the action is. The Start Finish line is right here. Nightly parties will happen out of the Griffin Pirate4x4 Lounge with the campfire just walking distance away. Cars will fill the aisles for Contingency and Tech and stay in town for the Raceline Wheels Show and Shine. And the Pirate4x4 TV Live! show will be running Live all week.

    Bring your shopping list and increase your line of credit because I guarantee you there will be something here that you want!

    To see all of the vendors and the map layouts go to: http://www.kingofthehammers.com/partners.php

    • 2010 Griffin King of the Hammers
    • 4 Wheel Parts Last Chance Qualifier
    • Pit Bull Tires UTV King of the Hammers
    • Official Tire: BFGoodrich
    • Official Wheel: RaceLine
    • Official Light: Vision X
    • Official Shock: FOA
    • Official Suspension System: GenRight
    • Official Toyota Rock Crawling Parts Supplier: Trail Gear
    • Official Steering: PSC Motorsports
    • Official Oil: Royal Purple
    • Official RC Car: Traxxas
  • 4 Wheel Parts Last Chance Qualifier Order and Course

    JOHNSON VALLEY, CA, JANUARY 29, 2010: The 2010 Griffin King of the Hammers has 21 additional spots available for the 42 competitors of the 4 Wheel Parts Last Chance Qualifier on Tuesday February 9th and Wednesday February 10th.

    The 2010 4 Wheel Parts Last Chance Qualifier order has been determined by random draw. Larry Gipson will be first off the line Tuesday morning to test his talents and attempt at qualifying. “I am used to all the pressure and know what needs to be done,” said Gipson. “I need to drive as hard as I can and be as smart as can be. I just need to finish it to get into the race on Friday.”

    By Wednesday afternoon the 42nd and final driver will be Tim Emick, who some argue will have the best opportunity after watching the 41 drivers before him complete the course. “I think this is the first time I am happy to go last,” said Tim Emick, whose brother Dustin Emick will be co-driving. “Only time will tell if we are really lucky though, it all depends on what the tracks are like after the 41 people before me.”

    The Last Chance Qualifier has a lot of names that are familiar with King of the Hammers. Ian McGlynn, Cottin Rodd and Larry Gipson all raced in the 2009 Griffin King of the Hammers main race last year and are still trying to qualify for this years race. There is also a group of seven that competed in last years LCQ who are trying their luck again including Brandon Johnson, Troy Bailey, James Andrus, Brandon Davis, Loren Healey, Jose Ponce and Josh Patt.

    There are 33 names on the 4 Wheel Parts Last Chance Qualifier list that have never competed in the event before. Trophy Truck driver Curt Leduc and NHRA Pro Sportsman Drag Racer Les Figueroa are included among them. Les comments, “This is a huge challenge not knowing what to expect, it’s the most homework I have ever done for a race, it’s a lot different than going really fast, and trying to stay straight! Luckily, we will be going in the first day and if we do well that will give us an extra day to prepare for Friday’s race and be successful.”

    There is quite a bit of strategy that will go into the qualifying process. Drivers will not only want to be in the qualifying group, but will be conscious of what position within the 21 they end up. As part of the Main Race starting draw, the LCQ starting positions were determined as well. For example, the Last Chance Qualifier that finishes in the 8th place, will take the 3rd position on the Main Race starting grid. Whereas, the driver that gets a better time in the LCQ and finishes 4th has a Main Race starting position of 94th! David Smiley who will race on day two said, “we will watch for times and try to position us the best as possible, although we know there are still a lot of drivers behind us that could throw it off. We will watch on Tuesday and change and firm up our strategy depending on what we see during Day 1 Qualifying.”

    The course this year is a grueling 6 miles. It starts by zig zagging up and around Means Butte and then increases speed through some fast desert to the Back Door obstacle that was the center of attention last year. Once the driver clears Back Door, they have a stretch of fast yet large whoops to handle and then go down Trap Door. As Back Door is a vertical climb, Trap Door is a vertical fall. Competitors will finish off the course with a very fast and fun desert section that has some serious potential for overdriving. As a spectator, it is good that there are two days of qualifying so you can move to different locations to see all the action. See the entire course rolled out at http://vimeo.com/9059027.

    Every spot in the Griffin King of the Hammers has been earned, but those that qualify through this final process could be called Knights of Armor. They are attempting to race two of the most challenging races back to back with only a day in between.

    A section by section presentation of the 4 Wheel Parts Last Chance Qualifier can be watched at: http://vimeo.com/9059027

    2010 4 Wheel Parts Last Chance Qualifier Starting Positions

    1 Larry Gipson

    2 Clay Eagan

    3 Michael Feagins

    4 Carl Nielson

    5 Jonathon Terhune

    6 John Goodby

    7 Robert Foster

    8 Willie Gray Roberson II

    9 Jack Childers

    10 Ian McGlynn

    11 Brian Tilton

    12 Mark Weel

    13 Ritchie Keller

    14 Brandon Johnson

    15 Chad Burchik

    16 Bill Kreisel

    17 Michael Colville

    18 Troy Bailey

    19 Matt Burkett/Curt Leduc

    20 Cottin Rodd

    21 Les Figueroa

    22 Jason Feuilly

    23 Josh Patt

    24 Shawn Fisher

    25 Matt Enochs

    26 Chad Wheeler

    27 Andy Gladen

    28 Brandon Davis

    29 Aaron Beckstead

    30 Gary Ferravonti

    31 James Andrus

    32 Jason Conover

    33 Rob Klinger

    34 David Smiley

    35 Scott Morris

    36 Damian Layer

    37 Joel Withers

    38 Joey Weber

    39 John Bennett

    40 Loren Healy

    41 Chris Garrison

    42 AJ Condon

    43 Matt Peterson

    44 Jose Ponce

    45 Tim Emick

    2010 Griffin King of the Hammers Starting Grid for LCQ Finishers

    3 LCQ 8

    5 LCQ 1

    9 LCQ 10

    10 LCQ 2

    14 LCQ 18

    18 LCQ 16

    19 LCQ 9

    25 LCQ 14

    26 LCQ 19

    34 LCQ 11

    53 LCQ 5

    58 LCQ 3

    60 LCQ 6

    64 LCQ 21

    75 LCQ 20

    77 LCQ 17

    82 LCQ 13

    83 LCQ 15

    84 LCQ 7

    94 LCQ 4

    99 LCQ 12

    • 2010 Griffin King of the Hammers
    • 4 Wheel Parts Last Chance Qualifier
    • Pit Bull Tires UTV King of the Hammers
    • Official Tire: BFGoodrich
    • Official Wheel: RaceLine
    • Official Light: Vision X
    • Official Shock: FOA
    • Official Suspension System: GenRight
    • Official Toyota Rock Crawling Parts Supplier: Trail Gear
    • Official Steering: PSC Motorsports
    • Official Oil: Royal Purple
    • Official RC Car: Traxxas
  • Nissan Frontier & Pathfinder Winch Bar

    Introducing the 2009-On Frontier & Pathfinder Combination Winch Bars

    Seattle, January 26/ ARB 4×4 Accessories/ — Late model Nissan Frontier and Pathfinder owners, ARB has good news for you. ARB 4×4 Accessories, manufacturer of purpose engineered 4×4 parts, distributed worldwide, is proud to announce the release of the

    2009-On Nissan Frontier and Nissan Pathfinder ARB combination winch bars.

    Manufactured from high quality steel then finished in a durable satin black powder coat finish, the ARB Combination Bars to suit the Nissan Frontier and Pathfinder are built to withstand the rigors of off-road driving. Offering significantly better protection than the OEM bumper, the ARB combination bar also features Hi-Lift jacking points integrated into the pan, and fully engineered mounting system suitable for Warn 8000/9000/9500 low mount winch models. Featuring mounts for driving lights, the bar also includes antenna mounts, and can be finished off with optional ARB fog lights in the wings for a truly integrated finish.

    Features include:

    • – Provisions for IPF driving lights, CB aerials and a range of Warn Winches
    • – Split pan design for optimum strength and airflow
    • – Recessed indicators and parking lights
    • – Superbly engineered, air bag compatible mounting system secures to chassis using high tensile bolts
    • – Optional 6821201 ARB fog light kit
    • – Hi-Lift Jack Points in pan
    • – OEM Recovery points retained

    For the full range of ARB product for the Nissan Frontier and Nissan Pathfinder, please visit our Vehicle Application section on the ARB USA website.

    About ARB

    ARB Corporation Limited is Australia’s largest and industry leading manufacturer and distributor of quality, 4WD vehicle accessories, with distribution in more than 100 countries worldwide.

    The company manufactures and stocks the worlds most respected and sought after brands including ARB Air Locker locking differentials and bumpers; Old Man Emu (OME) customized suspension systems, IPF high performance lightning, and Safari snorkel systems. ARB’s Seattle office is the North, South & Central American headquarters and importer of ARB 4×4 Accessories.

    To view the full line of ARB product, please visit the official ARB website at www.arbusa.com