|
Please support our sponsors
RUBICON TJ EXTREME DUTY SUSPENSION
(From Rubicon Express Press Releases)
 RUBICON
EXPRESS now offers a totally new suspension system for 1997 and
later Jeep Wranglers. The main feature of the kit is the replacement
of the short factory axle control arms with longer arms to improve
geometry for lifted applications. The new arms measure 36" long
and are made from thick wall 4130 steel for the ultimate in durability.
The arms are mounted to a new heavy duty cross member that allows
an additional 1" of ground clearance over stock. Other features
of the kit are: relocated front adjustable track bar and drop
pitman arm for improved steering, rear adjustable track bar, progressive
bump stops, extensive shock options, lift heights from 3-6", all
necessary hardware, and no exhaust modifications are required.
35" tires can be fitted with no body lift. The kit is 100% bolt
on and can be installed by most home mechanics.
 The
improved geometry allows for more stability at all speeds by minimizing
the axle steer for which lifted TJ's have been notorious. The
longer arms allow for more spirited off road driving which is
a major benefit when miles of bumpy road lie ahead. Also, unwanted
torque roll is limited due to the new control arm configuration.
Wheel travel is at a maximum and all beneficial for conquering
any obstacle or off -road situation without compromise. Drivers
will feel more confident both on the trail and on the street due
to more predictable handling and more control. Never before has
a vehicle been so competent for dual-purpose use than the new
Jeep Wrangler fitted with a RUBICON TJ EXTREME DUTY SUSPENSION.
Click
on photos to see larger versions
On
the forklift. Flex! |
The
kit |
Rear
Arms |
Front
Arms |
Front
Axle |
Hitting
the trails |
For further information,
contact:
RUBICON EXPRESS
3315 Monier Circle, Rancho Cordova, CA 95742
Phone: (916) 858-8575
http://www.rubiconexpress.com
|
