$3900 obo. Locked, Trussed, 7.4 to 1 transfer case, Propane conversion, etc etc. Located in SE WI (SALEM 53168). Plan on posting to ebay Saturday. Email for more info and/ or comment below. Have link to many pics. Thanks.
3 seater buggy chevy 4.3 built 350 trans 205 t case yota diffs with longfield inner and outer shafts 4.88 gears locked front and rear 3 link front 4 link rear 38 inch swampers with bead locks corbeau seats with harness this is a point and go rig has slow leak at the rear seal of the tranny but wheels fine $13500 obo located in Norman Oklahoma
Selling my 2014 Jeep Wrangler Unlimited Sport-Customized with just over 41,000 miles on it (mileage may go up as I do still drive it):
*1-tons (F350 front, Chevy 14 bolt rear)
*Toyo Open Country 40x15.5's with bead locks and a matching spare (wheel and tire)
*Warn lockout hubs
*Front and rear air lockers-switches are on drivers side seat with the air tank in the back
*Air compressor with air tank for airing up tires (not sure on brand, but it is the double lung)
*Upgraded Rubicon transfer case 4:1
*Smittybuilt SRC Roll Cage
*Custom skid plate
*Fox 2.5 coil over shocks
*Rear anti-rock sway bar links
*Pro comp limit straps and bump stops
*Front suspension is a 3-link, the back is a 4-link
*1 ton drag link with hiem joints
*PSC...
$62,250 No Trades
HIGHLIGHTS
Estimated $200,000 build
Updated with a 6.4L Hemi V-8 engine
8-speed automatic transmission
2-speed Atlas twin stick transfer case
4-wheel drive
Black Line-X exterior
Custom hood
Custom bumpers
Warn winch
Quick release sway bars
Trailing arm suspension
4-wheel Prodigy triple bypass coilovers
Dana Super 60 differentials front and rear
17 inch Raceline beadlock wheels with new 42 inch tires and full size spare
Walker Evans fully custom S10 rock race buggy. This tube chassis buggy is powered by
4.3L Chevy Vortec
Fluidine radiator
Powerglide transmission
Atlas 4.3 transfer case
Dynatrac Pro Rock axles front and rear
Final drive gear ratio 5:43
Triangulated four link front and rear
Walker Evans coil overs on all four corners
Goodyear Wrangler MT/R 40x13.5x17 on
Walker Evans billet bead lock 17" wheels
Howe hydraulic ram power steering
Ramsey winch up front with synthetic line
Warn winch in the rear
Auto meter gauges
Mastercraft seat and harnesses
Room to instal passenger seat
Cutter brakes
This rock racer was built for competition use and is a vary well known capable buggy. It comes with another set of skins (the blue set that can be seen...
List of details in the pictures. 40” Nittos with 17” true beadlock wheels. Good rig. Let me know if you want more details. Asking 12.5k obo rock crawler rock krawler
Tube framed , Toyota 4 cyl 22RE engine, uses very little gas, Marlin crawler cuts gear ratio in half, no canyon too steep and creep down without touching brakes, lockers front and rear, 39" KT Krawler stickies , lights, Superwinch, CA licensed and just passed smog, all seats have harnesses,cooler strapped in anger the $60,000 guys when you outcrawl them. $ 12,000, Bruce 619-993-8537
‘98 Jeep Cherokee - Located in Salt Lake City, Utah - Call/Text Kenny at 760 684 5766
If you are building a Cherokee, this XJ will give you almost everything you need.
Motor and trans are in great shape, always up to date on maintenance.
The body is kind of beat, it was a crawler, but as a donor vehicle to a cherokee project this will save you tons of time and money
The only hold up is that the Tcase needs serviced so this will need trailered.
I have more pics upon request but they were too big to post here
4.0 Motor
Dodge Neon Injectors (4 holes for better atomization)
Recent Tune up
New headers, larger downtube without the indent, cat convertor, and muffler
New Aluminum radiator, new coolant hoses, newish water pump
New Valve...
2021 Rock Lizard Sin City rolling chassis for sale, started this project in 2020 but unfortunately it is time to move on due to not having enough time or ambition to finish the project. Pretty much every part comes with the vehicle to finish the project except axle shafts and a carrier bearing. Also, there are many extra parts that you’ll need for the trail. I’ll try to list everything but I’m sure I’ll forget something. Easiest to just come and look for yourself. Here are the nuts and bolts of the build.
2021 Rock Lizard Sin City Chassis, 1.75 Heims
Engine - 403 LS 2 Stroker engine, stage 2 comp cam thumper, competition eagle rotating assembly, 57lb injectors, lsx truck intake, 102 mm drive by wire throttle body, arp studs, internal...
https://www.facebook.com/marketplace/item/856605948405702/
2018 Big Tex 24k 35+5 gooseneck trailer. Shocker hitch, 4 cameras, extra tiedowns, rub rails, spare tire, chain box, LED lights. Excellent condition.
This trailer was donated to Hero for a Day. Proceeds from the sale will help to further our mission.
2015 Custom Rock Buggy to be sold absolute through public online timed auction! This thing is a BEAST! Fitted with nitrogen shocks on all four corners, military grade lockable axles, massive competition off road tires, and a Dodge Viper V10 engine. Seats 4 comfortably, and makes a great noise when put to work.
To bid & register copy & paste this link: palletauctions.salesandauction.com/auctions/8737/erkele10226/lot-details/97f61472-416e-477e-9b0a-b088016a02a9
youtube video here:
Call or text w/ any questions 801-355-6655
Erkelens & Olson Auctioneers
TonyK Unlimited single seat chassis
Mid-engine 2.2 Ecotec
A-904 tranny
5:1 Atlas
9" axles with Detroits and 6.50 gears
Line lock on the front brakes
Cutting brakes on the rear brakes
(5) 39" red label Krawlers on 17x8 Method beadlocks
Rear suck-down winch (Summit 3000lbs)
Front WARN 9.0Rc winch
Griffin radiator
Very capable. Fairly competitive in both CalROCS and WERock (passed tech for both)
I am currently going through everything, including re-building the transmission as it blew a seal at the input shaft at the WERock Nationals. It will be running and ready for the next comp season.
$16000 is my bottom line
Ultra4 Race Buggy - 4 times King of Hammers Official Finisher
Asking $69,000
Over $150,000.00 was spent on this build.
New 18' PJ buggy trailer with drive over fenders can be included for another $3,900
Contact Adam directly with any questions at 323-620-2941
Summary:
Chassis: 2011 Fab10 Tube Frame - all chromoly
Rear End: 14 bolt
Front End: Dynatrac Pro 60
Steering: PCS Full Hydro
Engine: Race tune Alumimium LS2 rated @ 510hp
Transfer Case: Atlas 4 Speed
Transmission: TH400
Wheels: TR Race Beadlocks on BFG Krawlers
This 4 times KOH finisher is the real deal.
(Ultra4 finisher in 2012, 2013, 2014, Legends finisher 2016)
If you are looking for a true and tested, race proven vehicle with
real pedigree, look no further...
For Sale: the 4491 (4493 last year) Ultra4 Unlimited Class car
$55,000 AZ car, 2nd owner, "driven gently only on weekends", low mileage. But oh those miles are AWESOME miles! Less than approx 15 hours since motor was built.
Top 10 King of the Hammers (2014)
Top 20 King of the Hammers (2013)
4th Place Ultra4 West Series (2014)
8th Place Ultra4 National Points (2014)
5th in Class NORRA 1000 (Baja, Mexico 2014)
Consistent / multiple Dirt Riot wins, Top 10s at Glen Helen and Tooele, UT and the list goes on. This is a proven car.
The buggy is for sale and includes Parker Pumper, Window Nets, Spare Tires, Race Harnesses, the works. Everything is included except the helmet and fire suit, GPS, and radios. The buggy is also still...
Jeep was built by Clayton Off Road. 6" long arm lift, RockCruser Dana 60's with 5.38 gears locked front and rear. Warren premium hubs, hydraulic steering, PSC Hydraulic steering assist kit, Upgraded steering box, MRW w/bead locks. Original 4.0L Everything still works on the jeep and doesn't leak oil. Contact me with any questions.
One-off Jeep with best parts available on a no-hold barred build. Show quality with fresh paint, 2 sets of tire/wheels, 2 sets of doors, and 3 tops make this street / trail ready. Specifics:
Body
· Destroyer Grey with matter black hood / orange accents
· BTF frame stretch kit creating 105.5” wheelbase
· BTF front fender, comp cut armor rear
· Full cage tied into frame
· Metal roof (body color)
· Full doors and tube doors (body color) (2 sets)
· Bestop Soft top and Bikini, JTops Sunshade. (3 cnt)
· Custom boat sided rock sliders
· WARN VR12s winch with Factor 55 Flatlink E
· Rigid Side Shooter Driving Lights
· Outrageous Lighting 9 Rock Lights Bluetooth controlled...
I have hear is my jeep project. I have all the parts to make it into a roller just no time to finish it. Have jeep body, all chromoly parts for the 4 link front and rear fox shocks, jeep inline 6 motor with trans and to case, have bronco axels front and rear locked have all original jeep parts and some extra tubing for cha ssis also have racing seats. Looking to get $4000 but willing to take offers let me know what you have thanks 6128758545
105'' wheel base 2 seater
4.3 vortec bored 60 over -cpi injected hi-flow spider -hughes racing turbo 350 trans. input shaft and clutch upgrades - single transfer case /Toyota gear drive with marlin shafts 4.7 and twin stick shifters
8'' Toyota axles with six shooter knuckles ,arp studs chromoly drive flanges -longfield axles ,Detroit lockers - g-2 , 5:29 gears - rear trailgear disc brake kit -braided brake lines . 4 link front and rear full hydro steering -single ended ram . 13.50 39.5 x 17'' iroks on allied bead lock wheels . art carr shifter corbau seats5 point harness's -16'' fox air shocks -front and rear suck down winches with synthetic rope foam filled fuel cell 18 gallon . weighs 3340 lbs. 74'' wide with spacers .smooth skid...
Two seat rock crawler buggy chassis. For sale!
This is a new chassis design we just finished. The lower sub frame is 2” .188 wall along with 2”.120 wall for the front and back main lower bars. The remainder of the chassis is 1-3/4 .120. All DOM tube. The chassis was designed for an LS motor/auto trans and atlas, but can accommodate pretty much any drivetrain. We made provisions for a 27 gal fuel cell if desired. The radiator can either be mounted up front or in the rear. The chassis is set up for a112"- 114” wheel base. Endless possibilities make this a well round platform to start from. We can provide LS motor mounts installed, as well as fuel cell mount, radiator mount winch plate, belly pan, suspension brackets, body skins and roof...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.