RockCrawler.com

  • New Product – Tacoma SAS Kit B

    110209-1-K

    Our Tacoma Solid Axle Swap Kit B comes with everything you need, and more, to complete your SAS with a Toyota based axle housing. Trail-Gear has worked tirelessly to put together the most complete kit on the market at the most affordable price.

    Every component has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. We have included all of the necessary steering parts, oil pan conversion kit, cross member, and everything else you will need to do the job right. (more…)

  • Torchmate Racing Team Hits King of the Hammers With $500 Off 2×2 CNC Tables

    RENO, NV     JANUARY 27, 2011   The Torchmate Racing team taking on the 2011 Griffin King of the Hammers includes championship drivers JT Taylor, Jesse Haines, Brad Lovell and Roger Lovell.  Torchmate CNC Cutting Systems will be running tables the entire week of the event, with the ability to purchase on the lakebed at 4 Wheel Parts at a special price $500 off the 2×2 CNC Machine and onsite financing.  “I am really excited about the new relationship between Torchmate CNC Cutting Systems and 4 Wheel Parts.  The response to our latest Torchmate 2×2 CNC Prototyping System has been overwhelming,” said owner of Torchmate Bill Kunz.  “The partnership with 4 Wheel Parts is going to allow us to get the word out that CNC plasma cutting and routing technology is available to everyone, not only the fabricating elite.” (more…)

  • Southwest Crawlfest Raised Money for Land Use at 3-day Jeep Event

    SAINT GEORGE, UT     JANUARY 25, 2011    ECT Offroad Southwest Crawlfest presented by Poison Spyder had nearly 300 vehicles on the Sand Hollow OHV Recreation Trails participating in a clean-up and raffle for Land-Use.  “We had another great turn out this year,” explained Steve Crabtree, Event Chairman. “It was a perfect weekend for wheeling and it was fun to have everyone here enjoying the trails and helping support keeping the land open so we can continue to have events like these.” (more…)

  • Big Ugly 2.0 has Successful Debut at The Hammers

    Kevin Sacalas of Big Ugly Racing unveiled his new Ultra4 Race Car, “Big Ugly 2.0” out at the Hammers this weekend in preparation for the 2011 King of the Hammers race being held February 11th.  This is the 2nd Ultra4 car designed and fabricated entirely by Sacalas. His first Ultra4 car which fans affectionately named “Big Ugly” had several impressive podium finishes including 1st place in the 2009 BiTD Vegas to Reno, 2nd place in Silver State 300 and a 3rd place finish in the King of the Hammers Grand Slam of Offroad Racing series. (more…)

  • Rusty’s Dana 30 Gusset Kits for the JK, XJ, TJ & ZJ

    Rainbow City, AL, 1/24/10 – Rusty’s is proud to annouce the addition of two new gusset kits to help solidify that Dana 30 axles for Jeep Wrangler JK and TJs, XJ Cherokees and ZJ Grand Cherokees.

    The kit for the JK Wrangler is part #ADS30JK. The Rusty’s JK gusset kit is a 6 piece bracket kit that will reinforce your axle and add strength. Laser cut from ¼ inch steel. The gussets are precision cut to fit the axle and weld into place. With tires getting larger and the trails getting tougher, this is a small price to pay to strengthen your axle housing.

    The kit for TJs, XJs and ZJs is part #AG330. The Rusty’s model 30 gusset kit is a 3 piece bracket kit is designed for a model 30 in an XJ, TJ or ZJ. It will reinforce your axle and add strength. Laser cut from ¼ inch steel. The gussets are precision cut to fit the axle and weld into place. With tires getting larger and the trails getting tougher, this is a small price to pay to strengthen your axle housing. (more…)

  • Toyota 10.5″ 36 Spline ARB Air Locker

    TO SUIT 2007 On Toyota Tundra Rear w/5.7 Liter Engine

    Specifications:

    • 36 spline axle
    • 1.44″ (36.8mm) axle shaft diameter (outside of splines)
    • 12 bolt ring gear
    • 6.57″ (167mm) dia. ring gear ID
    • 10.5″ (267mm) dia. ring gear OD

    Features:

    • Patented ‘timed’ locking mechanism offers high strength and ultra fast un-locking
    • Comprehensive photo illustrated installation and service guides
    • Steel reinforced, elastomer bonded annular seal designed to handle the most extreme climatic temperatures on earth
    • Patented 2 piece design offers a range of interchangeable side gears (sold separately) to integrate with non-standard axle shaft splines

    Availability Date: Now