Tired of dealing with oil leaks from your front inner axle seal? Trail-Gear has remedied that issue by offering our new Trail-Safe™ FJ80 Inner Axle Seal. The Trail Safe™ inner seal lip is totally supported by a garter spring applying constant force over the full 360° circumference. This prevents any deflection gaps and stops oil from bypassing the seal lip. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. (more…)
Tag: FJ80
-
Trail-Gear is now offering FJ80 Knuckle Rebuild Kits
The Trail-Gear FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut & washers, and shims. New spindle bushings, trunnion bearings, and steel outer felt covers are also included. The stamped steel outer felt covers are not found in other most other kits. If you’re using your FJ80 in the rocks you will want to replace these covers when you service the knuckles. The FJ80 Knuckle kit has all the parts you need to service both left and right knuckles. Available with or without wheel bearings.
Available Options:
FJ80 Knuckle Rebuild Kit, 303441-1-KIT, $72.45
FJ80 Knuckle Rebuild Kit w/Wheel Bearings, 303749-1-KIT, $124.95
-
Longfield™ FJ80 Gun Drilled 30-Spline Super Set
The Longfield™ FJ80 Gun Drilled 30-Spline Birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the birfield are also made from 4340 chromoly and are dual heat treated for superior strength. The birfield has a M8 grease zerk at the end of the stub shaft and is gun drilled through the center of the birfield to allow for grease to pass through the zerk fitting and into the internals. This will save you precious time by eliminating the need to disassemble your axle just to service your birfields. (more…)