 After
many years of hard service, the Dodge was extremely sagged out. The
springs were flat and the body barely cleared these 32" BFG
A-T's. Once we added the 4" lift, it essentially gave the Ram
Charger about 6".

The rear is similar to the front.

The rear is similar to the front. Rough
Country does not supply brake lines and we did not find longer ones to
be needed on this project.
|
 The
front is pretty straight forward, as is the rear. Simply remove the
old springs and add the new ones. You may have to use bolt cutters to
get the old u-bolts off if they are too rusted out.
 Once
you have the new springs on you mount the new shocks.
 The
kit is simple and straight-forward. Not really much to it. The ride is
pretty good on the street. This truck is yet to see much off-roading
and was not tested for off-road ride at print time. |