Home Forum Swag and Sales Event Photos Sponsors Home

Archive for New Products – Page 3

34 78 220x147 EnerSys® Expands Product Line – Adding Group 34 and Group 78 Batteries to ODYSSEY® Performance Series™ Product LineREADING, Pa., (October 15, 2013) – EnerSys® has expanded its ODYSSEY® Performance Series™ battery product line to include a Group 34 battery and Group 78 battery, designed specifically for consumer passenger and commercial vans, custom and classic cars and SUVs. The ODYSSEY® Performance Series™ 34-790 battery and the ODYSSEY® Performance Series™ 78-790 battery both feature 792 cold cranking amps (CCA) and 114 reserve capacity (RC) minutes. They also feature deep cycle capability up to 400 cycles at 80 percent depth of discharge. Read More→

Comments (0)
Categories : New Products

Advanced Design Provides 50-Percent More Ventilation and Prevents Overheating

Rugged Ridge Performance Vented Hood Product Image Only 220x146 RUGGED RIDGE INTRODUCES ALL NEW PERFORMANCE VENTED HOOD FOR ’07 ’14 JEEP® JK WRANGLERSSuwanee, Ga. (October 1, 2013) – Rugged Ridge® today announced the availability of its all-new Performance Vented Hood for the 2007-2014 Jeep® Wrangler (JK).

Inspired by Chrysler’s aggressive SRT® designs, Rugged Ridge’s Performance Vented Hood is engineered to provide 50-percent more ventilating surface area over similar designs, helping heat quickly escape from the engine compartment to maximize engine efficiency. Read More→

Comments (0)

Is the featured plug used by Pink Jeeps of Sedona, Ariz.

gg1i plug CMYK HR 62x220 Pulstar® gg1 Pulse Plug Demonstrates Horsepower Increase in Jeep 3.6L Engine ApplicationsAlbuquerque, N.M. – The Pulstar® gg1 Pulse Plug for Jeep vehicles that utilize the Chrysler Pentstar 3.6L engine have shown an increase of six horsepower (HP) over stock plugs in dyno testing conducted by Enerpulse Inc. In addition, the testing demonstrated a fuel economy increase of 4.26 percent.

The Pulstar gg1 Pulse Plug fits the V6 engine applications for the 2011 to present Jeep Grand Cherokee in the following models: Laredo “E”, Laredo “X”, 70th Anniversary Edition, Trailhawk, Altitude Edition, Limited, Overland, and Overland Summit Edition. Read More→

Trail-Safe™ Samurai Inner Axle Seals

Wednesday, September 11th, 2013

Samurai Axle Seal 220x178 Trail Safe™ Samurai Inner Axle SealsTired of dealing with oil leaks from your front inner axle seal? Trail-Gear has remedied that issue by offering our new Trail-Safe™ Samurai Inner Axle Seal. The Trail Safe™ inner seal lip is totally supported by a garter spring applying constant force over the full 360º circumference. This prevents any deflection gaps and stops oil from bypassing the seal lip. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. Read More→

Comments (0)

Versatile New Battery Analyzer from CTEK

Monday, August 26th, 2013

CTEK BatteryAnalyzer CMYK HR 220x125 Versatile New Battery Analyzer from CTEKTwinsburg, Ohio – The Battery Analyzer from CTEK is the perfect testing solution for technicians as well as hobbyists and weekend mechanics. From cars to lawn mowers to snowmobiles, the Battery Analyzer can quickly test and diagnose all types of 12V lead-acid batteries including Wet, Maintenance Free, Ca/Ca, Gel and AGM. Read More→

Comments (0)

Nissan Patrol Creeper Locks™ Beadlock Wheel

Monday, August 26th, 2013

301021 KIT 220x140 Nissan Patrol Creeper Locks™ Beadlock WheelLooking for a beadlock wheel for your Nissan Patrol? Well look no further. Trail-Gear is now offering our Creeper Locks™ Beadlock Wheels for the Nissan Patrol. What are Creeper Locks? Creeper Locks are TrailGear’s Trail-Gear price! Creeper Locks are 17″ X 9″ wheels with a backspacing of 3.75″ and are made from a solid piece of aluminum. This wheel has a 4.37″ (111mm) center bore. Each wheel weighs a whopping 45 lbs with locking ring and hardware. These are no ordinary aluminum wheels, Creeper Locks™ are super tough and built to last. Each wheel is cast with the inner beadlock as part of the wheel. All 24 of the bolt holes on the wheel have steel Time-Serts® installed to prevent the bolts from galling. Drop down inner lip centers tire on to wheel during mounting. Six M12-1.25 lug nuts are provided with each wheel. Read More→

OMC Introduces Rock Krusher Jeep Winch Bumper

Monday, August 26th, 2013

High-clearance Cherokee/Comanche winch bumpers with dual jack points

OMC XJ Bumper3 205x220 OMC Introduces Rock Krusher Jeep Winch BumperBANNING, Calif. - Jeep specialist OMC Offroad offers the precision-built Rock Krusher front bumper for classic 1984-2001 Jeep XJ Cherokees and 1986-1992 MJ Comanches. These bumpers are fabricated in the USA using CNC laser-cut 3/16-inch-thick steel. Bends are formed with a CNC press brake. OMC integrates the mounting brackets into the bumper for durability, and all stress areas are reinforced. Two welded-on D-ring recovery tabs are ½-inch thick. Read More→

Baileigh Industrial® – The Band Saw Source

Sunday, August 25th, 2013

biilogo 220x84 Baileigh Industrial® – The Band Saw SourceBaileigh Industrial has a full line of manual, semi-automatic and fully automatic band saws in dozens of varying sizes to fit most production requirements.  Several of our most popular models are highlighted below.Call 920-684-4990 Today! Read More→

Comments (0)
Categories : New Products

Heavy-Duty Steel Design Offers Extra Protection for JKs

Rugged Ridge JK Wranger Front Steering Skid Plate Installed 220x146 RUGGED RIDGE INTRODUCES LINE OF SKID PLATES FOR ’07 ’13 JEEP® JK WRANGLERSuwanee, Ga. (August 21, 2013) – Rugged Ridge®, a leading manufacturer of high-quality Jeep accessories, today announced the availability of its complete line of undercarriage Skid Plates for 2007-2013 Jeep JK Wrangler.

Engineered to protect the most vulnerable areas of a Jeep’s underside, the Rugged Ridge Skid Plates shield eight major exposed mechanical components: steering, differentials, transfer case, engine, transmission, suspension arms, air conditioning and muffler. A simple bolt-on installation, the Skid Plates are an easy way to help prevent expensive damage from off-road obstacles. Read More→

Fein Short Slugger Magnetic Base Drill

Friday, August 16th, 2013

jhmshortslugger 220x220 Fein Short Slugger Magnetic Base DrillTrick-Tools is proud to announce the release of its newest product, the Fein JHM Short Slugger Mag Drill.  Like all mag drills, the Short Slugger features an electromagnetic base that secures it to the material being drilled. Annular cutters, which drill only the perimeter of the hole and eject the slug, allow this model to drill up to 1-3/16″ holes through up to 2″ thick steel.  Read More→

Comments (0)
Categories : New Products

Extra Long Ratchet Handles Provide Speed, Strength, Leverage and Access

84T ratchet2 220x95 GEARWRENCH INTRODUCES NEW 84 TOOTH LONG HANDLE RATCHETSSPARKS, MD (August 13, 2013) – GearWrench®, a premier hand tool brand from Apex Tool Group, known for tools that deliver speed, strength and access, today announced its new 84-Tooth Long Handle Ratchets. The handle on the new ratchets is over 25 percent longer than standard ratchets offering increased reach and greater leverage. It has a low profile GearWrench teardrop head and a flush-mount on/off

The 84-tooth gear offers a 4.3 degree swing arc making it easy for technicians to start fasteners in the most confined spaces. Like many GearWrench ratchets, the new 84-Tooth Long Handle Ratchets exceed ASME torque performance specifications delivering the required strength.  The longer handle provides technicians with increased reach and leverage.  Read More→

Comments (0)
Categories : New Products

WIZARDS® Introduces Mystic Clay™

Friday, August 9th, 2013

10023 Mystic Clay CMYK 144x220 WIZARDS® Introduces Mystic Clay™WIZARDS® Products is setting a new standard in detailing clay and surface restoration with the introduction of Mystic Clay™ (Part #10023). Mystic Clay™ quickly and easily removes tree sap, industrial fallout, rail or brake dust, and other contaminants that make your vehicle’s surface feel rough. It is also excellent for removing fresh overspray without harsh solvents or rubbing compound – saving you hours of time and the cost of professional buffing. Mystic Clay™ is safe for all paint/clears, glass, fiberglass, metal or any hard surface. Use Mystic Clay™ in conjunction with WIZARDS® highly regarded Mist-N-Shine® Professional Detailer (Part # 01214) to deliver the best gloss and extremely smooth finish without scratching. Mystic Clay™ is proudly made in the USA and is available for immediate sale in a 2 bar (120 gram) package. Read More→

Comments (0)