Author: RockCrawler.com

  • Trail Safe Inner Axle Seal

    140325-1-K

    Figure (A): Deflection gaps in the Brand X seal are the result of the spring clip opening. Fluid is allowed to bypass the seal lip through these deflection gaps. The result is a leak.

    Figure (B): The Trail Safe seal lip is totally supported by a garter spring. The spring applies constant force over 360º, not allowing any deflection gaps. This means no fluid leaks. (more…)

  • Help Keep Johnson Valley OHV Area open to the Public!

    There is still time to act to help us keep the Johnson Valley OHV area open to the public!

    As you are probably well aware, the Johnson Valley OHV area is very near and dear to our heart!  We are doing everything within our power to keep the area open to OHV use.  We ask that you please take a second and submit a comment to the Marines as to why it’s important to you.

    Listed below is a summary of points taken from attending the public information meetings over the last two days.  You are more than welcome to use this information when writing your comments! (more…)

  • Yokohama Tire Corporation Rolls Out New TV Ad

    30-Second Spot Features Off-Road Stars Cameron and Heidi Steele in a High-Speed Update of Classic Kids’ Game, “Duck, Duck, Goose”

    FULLERTON, CA (April 14, 2011) – Yokohama Tire Corporation (YTC) recently rolled out a high-powered, high-speed television commercial based on the classic kids’ game, “Duck, Duck, Goose” (DDG).

    The 30-second spot, shot in February at the San Bernardino International Airport, broke nationally on ABC during the 12 Hours of Sebring endurance race. It features off-road champions Cameron and Heidi Steele – both Yokohama-sponsored drivers – whipping around a circle of high-performance vehicles all equipped with Yokohama tires. Cameron (a Baja 1000 champion) in his 800-horsepower off-road truck and Heidi (a Baja 500 and 1000 champion) in a bright yellow Lamborghini Gallardo Superleggera chasing after him.  (more…)

  • SuperLite Racers Revved Up and Ready for Second Series Stop at Speedworld in Surprise, Ariz.

    General Tire’s Jeff ‘OX’ Kargola, Walker Evans’ RJ Anderson seek to keep winning streak alive

    RENO, NV— The last bolts are being tightened, the dents and gashes from last race’s crashes repaired, and the drivers itching to be back on dirt chasing the SuperLite Championship Series crown at the Surprise, Ariz. Speedworld Off-Road Park for rounds three and four of the Lucas Oil Off-Road Racing Series, April 16 and 17.

    Walker Evans Racing’s RJ Anderson and General Tire’s Jeff “Ox” Kargola each jumped to the top of the leader board with their respective wins in the first two rounds of SuperLite racing action. But they’ll have to keep at bay a pack of hungry racers, including Torchmate’s CJ Greaves — Dirt Sports Magazine’s Rookie of the Year for 2010 — Dawson Kirchner, Jessie Johnson (brother of NASCAR champion Jimmie Johnson) and SiriusXM radio host Jason Ellis. skateboarder and MMA fighter (more…)

  • Torchmate Racing Brad Lovell Takes Overall Win at BRT Desert Race, Jesse Haines Wins Cal-Neva Extreme and Tyler Thomas and Matt Shrive Compete at 2011 Arctic Man

    RENO, NV     APRIL 13, 2011   Torchmate Racing had drivers at every aspect of the country last weekend.  In Texas, Brad Lovell made history taking the Overall Win at the BRT Blackwelll 250 Desert Race in an Ultra4 car.  Rock Crawler Jesse Haines took the Unlimited Class win at the Cal-Neva Extreme event in Reno, NV successfully completing every bonus line.  In Alaska, Torchmate Racing Tyler Thomas and Matt Shrive raced in the 2011 Arctic Man where their hopes of leaving with the win got cut short when Shrive crashed at speeds over 50mph on his snowboard. (more…)

  • Tube Notching Perfection

    Tube Notcher TN-800The Baileigh Industrial TN-800 tube notcher is the ultimate machine for notching tube and pipe when you demand precision, performance, and perfection.

    Coping pipe has never been easier due to the TN-800s incredible versatility and user friendly design.  The patented adjustment feature enables the 1″ endmill to perform the task of notching anywhere from 1″ OD to 3″ OD with a simple turn of a wrench.  A removable v-block on the fully adjustable vise allows for quick centering of your material as well as the ability to cope solids, flats and angle to  virtually any degree. (more…)