Author: RockCrawler.com

  • Prescott National Forest Seeks Public Comment on Forest Plan Revision

    The Prescott National Forest, Located in central Arizona, is revising their Forest Land and Resource Management Plan (Forest Plan).The Forest Service (FS) is asking the public to help identify issues to be addressed as they begin this plan revision.

    The Forest Plan is the basic document used to provide guidance for all resource management activities on the National Forest for the next 10 to 15 years. The agency plans to release a draft revised plan and Draft Environmental Impact Statement (DEIS) for formal comment near the end of 2010. A final revised plan and Final Environmental Impact Statement (FEIS) is expected to be out by the end of 2011.

    Comments will be most useful in the development of the draft revised plan and Draft Environmental Impact Statement if they are received by February 15, 2010.

    Send written comments to:

    Prescott National Forest
    Attn: Forest Plan Revision Team
    344 South Cortez Street
    Prescott, Arizona  86303

    Comments may also be sent via e-mail by using the “Contact Us” page on the Prescott National Forest planning Web site: http://www.fs.fed.us/r3/prescott/plan-revision/get-involved.shtml

    For more information, contact Sally Hess-Samuelson, Forest Planner, Prescott National Forest, 344 South Cortez Street, Prescott, Arizona 86303, shesssamuelson@fs.fed.us, 928-443-8216. Information on this revision is also available at Prescott National Forest revision Web site: http://www.fs.fed.us/r3/prescott/plan-revision/index.shtml

    As always, if you have any questions or concerns, please contact BRC.

  • 4 Wheel Parts Last Chance Qualifier Order and Course

    JOHNSON VALLEY, CA, JANUARY 29, 2010: The 2010 Griffin King of the Hammers has 21 additional spots available for the 42 competitors of the 4 Wheel Parts Last Chance Qualifier on Tuesday February 9th and Wednesday February 10th.

    The 2010 4 Wheel Parts Last Chance Qualifier order has been determined by random draw. Larry Gipson will be first off the line Tuesday morning to test his talents and attempt at qualifying. “I am used to all the pressure and know what needs to be done,” said Gipson. “I need to drive as hard as I can and be as smart as can be. I just need to finish it to get into the race on Friday.”

    By Wednesday afternoon the 42nd and final driver will be Tim Emick, who some argue will have the best opportunity after watching the 41 drivers before him complete the course. “I think this is the first time I am happy to go last,” said Tim Emick, whose brother Dustin Emick will be co-driving. “Only time will tell if we are really lucky though, it all depends on what the tracks are like after the 41 people before me.”

    The Last Chance Qualifier has a lot of names that are familiar with King of the Hammers. Ian McGlynn, Cottin Rodd and Larry Gipson all raced in the 2009 Griffin King of the Hammers main race last year and are still trying to qualify for this years race. There is also a group of seven that competed in last years LCQ who are trying their luck again including Brandon Johnson, Troy Bailey, James Andrus, Brandon Davis, Loren Healey, Jose Ponce and Josh Patt.

    There are 33 names on the 4 Wheel Parts Last Chance Qualifier list that have never competed in the event before. Trophy Truck driver Curt Leduc and NHRA Pro Sportsman Drag Racer Les Figueroa are included among them. Les comments, “This is a huge challenge not knowing what to expect, it’s the most homework I have ever done for a race, it’s a lot different than going really fast, and trying to stay straight! Luckily, we will be going in the first day and if we do well that will give us an extra day to prepare for Friday’s race and be successful.”

    There is quite a bit of strategy that will go into the qualifying process. Drivers will not only want to be in the qualifying group, but will be conscious of what position within the 21 they end up. As part of the Main Race starting draw, the LCQ starting positions were determined as well. For example, the Last Chance Qualifier that finishes in the 8th place, will take the 3rd position on the Main Race starting grid. Whereas, the driver that gets a better time in the LCQ and finishes 4th has a Main Race starting position of 94th! David Smiley who will race on day two said, “we will watch for times and try to position us the best as possible, although we know there are still a lot of drivers behind us that could throw it off. We will watch on Tuesday and change and firm up our strategy depending on what we see during Day 1 Qualifying.”

    The course this year is a grueling 6 miles. It starts by zig zagging up and around Means Butte and then increases speed through some fast desert to the Back Door obstacle that was the center of attention last year. Once the driver clears Back Door, they have a stretch of fast yet large whoops to handle and then go down Trap Door. As Back Door is a vertical climb, Trap Door is a vertical fall. Competitors will finish off the course with a very fast and fun desert section that has some serious potential for overdriving. As a spectator, it is good that there are two days of qualifying so you can move to different locations to see all the action. See the entire course rolled out at http://vimeo.com/9059027.

    Every spot in the Griffin King of the Hammers has been earned, but those that qualify through this final process could be called Knights of Armor. They are attempting to race two of the most challenging races back to back with only a day in between.

    A section by section presentation of the 4 Wheel Parts Last Chance Qualifier can be watched at: http://vimeo.com/9059027

    2010 4 Wheel Parts Last Chance Qualifier Starting Positions

    1 Larry Gipson

    2 Clay Eagan

    3 Michael Feagins

    4 Carl Nielson

    5 Jonathon Terhune

    6 John Goodby

    7 Robert Foster

    8 Willie Gray Roberson II

    9 Jack Childers

    10 Ian McGlynn

    11 Brian Tilton

    12 Mark Weel

    13 Ritchie Keller

    14 Brandon Johnson

    15 Chad Burchik

    16 Bill Kreisel

    17 Michael Colville

    18 Troy Bailey

    19 Matt Burkett/Curt Leduc

    20 Cottin Rodd

    21 Les Figueroa

    22 Jason Feuilly

    23 Josh Patt

    24 Shawn Fisher

    25 Matt Enochs

    26 Chad Wheeler

    27 Andy Gladen

    28 Brandon Davis

    29 Aaron Beckstead

    30 Gary Ferravonti

    31 James Andrus

    32 Jason Conover

    33 Rob Klinger

    34 David Smiley

    35 Scott Morris

    36 Damian Layer

    37 Joel Withers

    38 Joey Weber

    39 John Bennett

    40 Loren Healy

    41 Chris Garrison

    42 AJ Condon

    43 Matt Peterson

    44 Jose Ponce

    45 Tim Emick

    2010 Griffin King of the Hammers Starting Grid for LCQ Finishers

    3 LCQ 8

    5 LCQ 1

    9 LCQ 10

    10 LCQ 2

    14 LCQ 18

    18 LCQ 16

    19 LCQ 9

    25 LCQ 14

    26 LCQ 19

    34 LCQ 11

    53 LCQ 5

    58 LCQ 3

    60 LCQ 6

    64 LCQ 21

    75 LCQ 20

    77 LCQ 17

    82 LCQ 13

    83 LCQ 15

    84 LCQ 7

    94 LCQ 4

    99 LCQ 12

    • 2010 Griffin King of the Hammers
    • 4 Wheel Parts Last Chance Qualifier
    • Pit Bull Tires UTV King of the Hammers
    • Official Tire: BFGoodrich
    • Official Wheel: RaceLine
    • Official Light: Vision X
    • Official Shock: FOA
    • Official Suspension System: GenRight
    • Official Toyota Rock Crawling Parts Supplier: Trail Gear
    • Official Steering: PSC Motorsports
    • Official Oil: Royal Purple
    • Official RC Car: Traxxas
  • Recreational Off-Highway Vehicle Association Urges Enthusiasts and Industry to Comment on CPSC’s ROV Rulemaking

    ROHVA Creates www.rohva.org/anpr to Facilitate Submission

    IRVINE, Calif., Jan. 28, 2010 — The Recreational Off-Highway Vehicle Association (ROHVA) is calling on enthusiasts and industry representatives to submit comments by March 15, 2010 in response to the U.S. Consumer Product Safety Commission (CPSC) proposed mandatory standards for Recreational Off-Highway Vehicles (ROVs), also known as side-by-sides and UTVs.

    (more…)

  • Nissan Frontier & Pathfinder Winch Bar

    Introducing the 2009-On Frontier & Pathfinder Combination Winch Bars

    Seattle, January 26/ ARB 4×4 Accessories/ — Late model Nissan Frontier and Pathfinder owners, ARB has good news for you. ARB 4×4 Accessories, manufacturer of purpose engineered 4×4 parts, distributed worldwide, is proud to announce the release of the

    2009-On Nissan Frontier and Nissan Pathfinder ARB combination winch bars.

    Manufactured from high quality steel then finished in a durable satin black powder coat finish, the ARB Combination Bars to suit the Nissan Frontier and Pathfinder are built to withstand the rigors of off-road driving. Offering significantly better protection than the OEM bumper, the ARB combination bar also features Hi-Lift jacking points integrated into the pan, and fully engineered mounting system suitable for Warn 8000/9000/9500 low mount winch models. Featuring mounts for driving lights, the bar also includes antenna mounts, and can be finished off with optional ARB fog lights in the wings for a truly integrated finish.

    Features include:

    • – Provisions for IPF driving lights, CB aerials and a range of Warn Winches
    • – Split pan design for optimum strength and airflow
    • – Recessed indicators and parking lights
    • – Superbly engineered, air bag compatible mounting system secures to chassis using high tensile bolts
    • – Optional 6821201 ARB fog light kit
    • – Hi-Lift Jack Points in pan
    • – OEM Recovery points retained

    For the full range of ARB product for the Nissan Frontier and Nissan Pathfinder, please visit our Vehicle Application section on the ARB USA website.

    About ARB

    ARB Corporation Limited is Australia’s largest and industry leading manufacturer and distributor of quality, 4WD vehicle accessories, with distribution in more than 100 countries worldwide.

    The company manufactures and stocks the worlds most respected and sought after brands including ARB Air Locker locking differentials and bumpers; Old Man Emu (OME) customized suspension systems, IPF high performance lightning, and Safari snorkel systems. ARB’s Seattle office is the North, South & Central American headquarters and importer of ARB 4×4 Accessories.

    To view the full line of ARB product, please visit the official ARB website at www.arbusa.com

  • ROUGH COUNTRY’S NEW 04-06 JEEP LJ LONG ARM LIFT KITS

    Dyersburg, TN – Rough Country recently introduced a new addition to their ever expanding line of Jeep lift kits. The new Jeep 04-06 LJ X-Series Long Arm Kits are available in both 4 and 6” configurations. Available at an unbelievable value, these kits deliver great features such as high clearance Y-link front design, high clearance four link design in the rear, rebuildable x-flex joints, heavy duty steel control arm mounts, front and rear adjustable track-bars, and high performance 2.2 shocks for a great ride. Customers already sporting a 4 or 6” Rough Country lift kit will have the option to purchase a long arm upgrade kit at a fraction of the cost. As always, Rough Country includes their 100% satisfaction guarantee and “If you have a problem, we will fix it” warranty.

    For more information on the new 04-06 Jeep LJ Long Arm Suspension Lift kits, please contact Rough Country Suspension Products at http://www.roughcountry.com or call 800-222-7023. You may also contact Rough Country to find an authorized Rough Country dealer near you, or visit the “Dealer Locator” link at http://www.roughcountry.com.

    About Rough Country:

    Formed in early 1970’s, Rough Country Suspension Products was one of the founders of the off-road industry and today is one of the fastest growing manufacturers and marketers of lifted suspension packages and off-road accessories for both 2wd and 4wd trucks and SUVs. Rough Country Suspension Products is owned by Heckethorn Products. Heckethorn Products has a storied history in the automotive aftermarket that includes inventing the first steering stabilizer for military Jeeps in the 1950s. As a complete supplier, Rough Country Suspension Products offers retailers, jobbers, and consumer direct customers an opportunity to purchase the products that the market is demanding.