Recent content by mac33

https://www.amazon.com/dp/B08JLSJS19?tag=ihco-20

Was talking to a supplier and apparently wilwood has discontinued the above calipers and replaced them with PN 120-13843 Has anyone used these new ones?

I tried the same but I couldn‘t fit the 3/4“ pipe due to my rotors so a made this with an extra jack pad I had. Worked out well.

From my experience, I think you’ll still want a rear cutting brake or at least plan a place for one. I originally had a singe pedal, with a push/pull cutting break and found it could get tricky, especially going down hill in front dig holding the hand brake then adjusting the rear steer. So I...

For what it's worth IMO, there's lot a factors that go into finding the "sweet spot" in crawl ratio, gearing is obviously a huge part of the equation but torque converts, motor, turbo, Superchargers... all play a big part in it, I swapped a AW4 with a slightly lower than stock stall into a NA...

Any updates on this thing?

What about the little triangle 8 gal Jaz cell, you can stuff it behind your seat a bit more.

I believe this is the same car and he's been wheeling the piss out of it

For what it’s worth, a friend of mine convinced me to buy one and they’re great. So easy to blend in tubes and welds seamlessly.

Thanks for the heads up on these. Picked one up for this past weekend and worked great. Saves me unloading a storage rack of gear

I’m definitely going hard lines in the future Spoke with SHO and they switched Steve’s new buggy and said it made a huge difference in the pedal

Wanted to add to this thread as I struggled for 3 solid days with a harbor freight bleeder that literally sucked. I ordered a mityvac on Amazon but returned it when I found these for 1/3 the cost. Got it on Friday and blend the brakes in 30 min...

Thanks Woody I tracked it down

Woody What was the process on bleeding the brakes with the Mityvac and the hand brakes ? I'm struggling to bleed mine right now so ordered a mityvac it'll be here thursday

My RCI didn’t leak from the seams it leaked from everywhere right off the bat Customer services was pretty lackadaisical “oh here’s a free cork gasket”. I swapped to a motobuilt tank/mount and had zero issues But after seeing at Woodys I’d go that rout in the future