Latest activity

  • woody
    woody replied to the thread RockCrawler HQ.
    Next up, a busted stud and a cracked housing... the bottom stud area was welded once and didn't like KOH. Needs a little more love this...
    • PXL_20210227_181725351.jpg
    • PXL_20210227_181708220.jpg
  • woody
    woody reacted to knapp870's post in the thread Build Thread JHF Trail Chassis with Like Like.
    I did have issues with the stainless locking up during install but found if i ran them in the extruded U nuts first alone or a dab of...
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Rust, in the desert? ;) I ran these black screws on my FToy as well, 4 years with zero issues. Climate does help however. Stainless...
  • woody
    Search "full size invasion moab" and I'll bet you can find more info....Pritchett would be the only major trail in Moab that might be...
  • woody
    woody reacted to knapp870's post in the thread Build Thread JHF Trail Chassis with Like Like.
    Mcmaster Carr also has a good price on stainless flanged button heads like what you got of various lengths.
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Fiber Reinforced Plastic....basically, bathroom wall paneling ;)
  • woody
    Plenty do, one of the groups at EJS is the Full Size Invasion. I suspect most armor for the fullsize rigs is geared more towards the...
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Amazon, of all places...lol
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Today's progress... Found the 1/4-20 flange head cap screws and installed those in the roof. Side panels? FRP? Cheap, and...
    • PXL_20210226_032013182.jpg
    • PXL_20210226_032023585.jpg
    • PXL_20210226_032037892.jpg
    • PXL_20210226_032106112.jpg
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Need to order the correct button head hardware and finish the 4 B pillar bolts, but the roof is done. (Well, and do the quilted...
    • PXL_20210225_030149513.jpg
    • PXL_20210225_030222191.jpg
    • PXL_20210225_030552672.jpg
  • woody
    woody replied to the thread Build Thread S&N Re-Build.
    Routing exhaust is a pain....not looking forward to doing mine. Looks like you actually have enough space there however....but it's...
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Fuel cell and fuel cell skid, mocked/mounted. The skid plate is 16ga, 20" x 20.75", plasma cut with the edge scallops and 25 1-1/2"...
    • PXL_20210223_183218697.jpg
    • PXL_20210223_185208948.jpg
    • PXL_20210223_191648801.jpg
    • PXL_20210223_193828105.jpg
    • PXL_20210223_193835792.jpg
    • PXL_20210223_193845388.jpg
  • woody
    I'm not sure if any of you even knew that ORBA has its own e-magazine that is focused on off-road businesses, and is also your business...
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    You have to machine them...they don't fit otherwise ;) Had mine done last week at Sand Hollow Offroad in their lathe. Today's projects...
  • woody
    woody replied to the thread Build Thread JHF Trail Chassis.
    Have some "used" aluminum laying around, decided to cut out a "severe" duty hood panel. 1/4+" thick is a bit much...but no worries...
    • PXL_20210217_221050469.jpg
    • PXL_20210217_221108260.jpg
    • PXL_20210217_221124063.jpg
Top Bottom