RockCrawler.com

  • AMSOIL Introduces New Engine Assembly Lube

    AMSOIL Assembly Lube is specially formulated to provide exceptional wear protection against rust and corrosion in newly built or rebuilt four-stroke engines. The new product dissolves in oil, helping to eliminate oil port clogging and deposit formation.

    AMSOIL Assembly Lube contains high levels of anti-wear additives to protect critical parts during initial startup including camshaft lobes and bearings, lifters, rocker arms, rod and main bearings. A high-viscosity base oil and unique tackifier provides a long-lasting cohesive cling for added protection.  (more…)

  • PIAA Lights the Way to ATV Victory at Tecate SCORE Baja 500

    PORTLAND, Ore. – Once again, PIAA lamps lit the way to victory at a demanding ATV endurance race – this time the prestigious 43rd running of the Tecate SCORE Baja 500 held in early June. Mike Penland Racing, with Penland and Carl Vela at the controls, won SCORE Class 26 for utility ATVs, completing the course in 15 hours and 31 minutes.

    Mike Penland Racing is based in Rabun Gap, Ga.; co-driver Vella is from Ardsley, N.Y. Their Can-Am Outlander 800 utility ATV was equipped with two 6-inch PIAA HID Shock Lamps and two smaller HID Cross Country lamps. Together, the PIAA HID foursome tuned night into day over the final hours of the race. (more…)

  • Torchmate Racing Announced as Title Sponsor of Ultra4 Stampede

    Four Teammates Head to American Rock Sports Challenge This Weekend

    RENO, NV    JULY 13, 2011  Torchmate CNC Cutting Systems has officially been announced as the Title Sponsor of the Ultra4 Stampede, after being a primary sponsor of the “Lucas Oil on the Edge” 2011 Griffin King of the Hammers TV Show and supporting an entire team for the Ultra4 series including 4 entries at this weekends American Rock Sports Challenge.  The Torchmate Racing Team is burning an impression on the entire offroad community as impressive as the Torchmate CNC Tables precision cuts.  (more…)

  • JK Wheel Adapter, Dodge 8 Lug Wheel Spacer – Rough Country Suspension Systems

    Roll Your Own Way – Jeep JK Wheel Adapter and Dodge 8-Lug Spacer

    DYERSBURG, TENNESSEE— Rough Country’s new JK Wheel Adapter will revolutionize the way you roll. This simple adapter allows you to run previous model wheels on Jeep JK’s. Why bother with the limited options and higher cost of newer wheels? This adapting spacer retrofits your JK’s existing 5X5″ bolt pattern to a 5X4.5″ bolt pattern, affording you the ability to run TJ, XJ, and YJ wheels. This bolt-on adapter also acts as a 1.5″ wheel spacer, allowing use of a wider tire on stock wheels and giving your vehicle an aggressive look. Made of 6061-T6 Aluminum, these wheels are corrosion resistant and ready to withstand the elements. Retails for $59.95. (more…)

  • Bill Baird 62yr old Rookie in Ultra4 has Long Racing History

    Will Compete at Ultra4 Rock Sports Challenge This Weekend

    STURGIS, KY   JULY 12, 2011  Bill Baird is a retired ARCA Champion who bought a Campbell Enterprises buggy in March, finished 5th last month at Rausch Creek qualifying for the 2012 King of the Hammers and will compete at the Rock Sports Challenge this weekend at Miller Motorsports Park in Tooele, UT.  “I didn’t know that one race would turn into the series, but I sure am glad that it has,” said Bill Baird who plans to race the rest of the 2011 Ultra4 Series in preparation for the 2012 Griffin King of the Hammers. (more…)

  • New Pneumatic Spotweld Drill with Higher Torque and Lower RPM

    Blair Equipment Co., Inc. (Flint, MI), producers of precision sheet metal holemaking tools and spotweld cutters used in automotive body repairs, fabrication and aftermarket equipment installations introduces the Enforcer™ Spotweld Drill (Part No. 11300). The pneumatic powered spotweld drill removes spotwelds in seconds with minimal effort. The patented Enforcer Spotweld Drill can remove spotwelds in all types of automotive materials and features a lower drill bit speed of 800 rpm which is more effective on today’s ultra-high strength steels and Boron materials. The Enforced lever is manually operated to feed the spotweld cutter into and through the spotweld. This manual operation maximizes drill bit torque with no reduction in air flow and improves spotweld removal rates. The drill bit penetration is adjustable for exact depths ensuring only one panel is drilled through resulting in no damage to the underlying panel. The comfort grip handle reduces operator fatigue and ensures a solid grasp even in slippery conditions.