Custer Products is pleased to announce Build-A-Bar LED Light Bars, which are an addition to Custer’s Never Night™ Off-Road Series of LED Light Bars. Build-A-Bar enables you to build a custom lighting system that’s just the right size for your needs. The light bars also allow you to achieve a unique custom appearance. Build-A-Bar is perfect for Off-Road, Marine, Heavy Duty, Agricultural, and other 10-30 volt applications. Engineered for high performance use, Build-A-Bar LED Light Bars are comprised of 7-inch long interlocking lamp units, which can be attached side-to-side to build a light bar ranging from narrow to wide. Or, lamps can be stacked, by interlocking top to bottom. Lamp units can also be attached both side to side, and top to bottom, to form a “wall of light”. Lamps can be interlocked to any length or height you need, and are available in flood light or spot light beam patterns. Light up the night by using flood and spot lamps together for wide and far reaching light. Lamp units utilize long life 30-Watt CREE light-emitting diodes (LEDs) to achieve bright beam patterns, and minimize energy use. Each lamp unit produces 3,000 lumens of light. To ensure high performance and reliability during extreme use, Build-A-Bar LED Light Bars feature rugged die cast aluminum housings, high impact polycarbonate lenses, and are certified IP-67 for water and dust intrusion. Lighting systems Include stainless steel mounts, and connecting hardware. Build-A-Bar LED Light Bars are supported by Custer’s renowned friendly and knowledgeable customer service. Custer Products – for a little more money, you get a lot more light. For more information go to http://www.custerproducts.com/
Tag: LED Light bar
-
Custer’s New Build-A-Bar LED Light Bars Allow You to Build Your Own Customized Light Bar
product/build-a-bar/ . -
Trail-Gear is now offering a LED Light Bar Rubber Isolator
Long LED light bars tend to create unwanted noises at higher speeds due to the cooling fins vibrating. Stop the vibrating resonance noises with our LED Light Bar Rubber Isolator. The LED Light Bar Rubber Isolator is made out of silicone rubber. Installation is easy and just snaps in between the cooling fins. Sold Individually.LED Light Bar Rubber Isolator, 303772, $5.25
-
Trail-Gear is now offering Curved LED Light Bars
Trail-Gear’s TG Curved LED Light Bars are versatile and can be mounted on any vehicle ranging from trucks, cars, and UTVs. These lights are powerful enough to light up the darkest road or trail. The curved design of the TG Curved LED Light Bar not only looks futuristic, it also helps to spread out the light emitted from thelight bar to give you a wider range of visibility on the trail.
The TG Curved LED Light Bars have a combo flood and spot optics with 3W Cree LEDs with a color temp of 6500K (cool white). The lens on the TG Curved LED Light Bars is made out of shatter-resistant polycarbonate material to prevent any damage to the optics. The housing is made out of extruded aluminum for superior strength. The end caps and brackets on the light bars are made out of die cast aluminum that is powder-coated black. Rubber anti-vibration isolators are provided to prevent damage to the mounting surface. The brackets can mount to both tubes and flat surfaces. Each curved LED light bar include a 15” wiring pigtail (2×18-gage wire with outer jacket). The input voltage on the LED light bar is 10-30VDC.
TG Curved LED Light Bars are IP67 Rated.
Note: Covers sold separately. Opaque black covers may be required by law in your area.
Available Options:
TG Curved LED Light Bar, 20”, 303419, $197.35
TG Curved LED Light Bar, 30”, 303420, $261.45
TG Curved LED Light Bar, 40”, 303421, $313.95
TG Curved LED Light Bar r, 50”, 303422, $366.45
