woody's latest activity

  • woody
    woody reacted to SteerAndStuff's post in the thread Controls layout? with Like Like.
    I used a 2 bolt clamp from A&A to mount my steering column. Gave some in/out adjustment to fine tune the mount.
  • woody
    woody replied to the thread Wende XL Buggy Build.
    Install the shutoff as close to the tank as you can, makes servicing super easy. I found one on Amazon for $15ish that worked perfectly.
  • woody
    woody reacted to Boom's post in the thread Wende XL Buggy Build with Like Like.
    Yes, I will be going with an external pump. I have Walbro 340 and E2000 on the shelf. Current rig is set up with an external pump well...
  • woody
    woody reacted to Boom's post in the thread Controls layout? with Like Like.
    That's great. I have the same steering wheel (in red flake). My plan is to get the Atlas mounted, then mock up the driver seat, and...
  • woody
    woody replied to the thread Wende XL Buggy Build.
    External fuel pump? If yes, be SURE the pump and filter are located well below the bottom of the fuel cell. My fuel filter/pump are...
  • woody
    woody reacted to Boom's post in the thread Wende XL Buggy Build with Like Like.
    The GLFab Exhaust manifold came in last week. He really does a great job on these. Naturally I had to throw the Turbo on for good...
  • woody
    woody replied to the thread Controls layout?.
    Lots of variables, but yes....ish... Not clipped, so it'd be about 1" further forward. Trans is in neutral (re-spooling the winch line...
    • PXL_20250423_202525112.webp
  • woody
    woody replied to the thread Behemoth D300 Apex.
    More: This should be obvious.... O-ring recess: And the O-ring with some Gear Lube Gasket maker schmeared on it...
    • PXL_20250415_202153258.webp
    • PXL_20250415_211125179.webp
    • PXL_20250415_211844628.webp
    • PXL_20250415_211837749.webp
    • PXL_20250415_211129670.webp
  • woody
    woody replied to the thread Behemoth D300 Apex.
    Pics from assembly: See those holes in the cam above the shift arm? That's where those tiny Blue-buried set screws reside... Front...
    • PXL_20250413_235247233.webp
    • PXL_20250415_193740132.webp
    • PXL_20250415_193816703.webp
    • PXL_20250415_200729916.webp
    • PXL_20250415_202027119.webp
  • woody
    woody replied to the thread Behemoth D300 Apex.
    Tools and things... Allen wrenches: 5/16, 7/32, 3/16, 5/32, 3/32. The 3/32 is what's used for the set screw that captures the flat head...
    • PXL_20250422_194217219.webp
  • woody
    woody replied to the thread Behemoth D300 Apex.
    Stock D300: 16" wide and 8" tall MMW300: 16-1/2" wide and 8-1/2" tall Apex300: ~17" wide and 9-7/8" tall including linkage heims (case...
  • woody
    woody reacted to jeeppoor's post in the thread Behemoth D300 Apex with Like Like.
    I blew our dana 300 gears out last year ay wolf caves. Started to build a new buggy. Took a chance and ordered their 4 speed case. When...
  • woody
    woody replied to the thread Introduction.
    See you in Cedar??
  • woody
    woody reacted to Dvora's post in the thread Introduction with Haha Haha.
    Hello I'm Dwayne from DVORA. I like Rocks I hate mud.
  • woody
    woody replied to the thread Behemoth D300 Apex.
    Stuff Behemoth provides for install that I didn't use... 6 threaded studs with washers and nylocks...the studs are the good ones with...
    • PXL_20250419_164344900.webp
Show older items
Back
Top Bottom