Home Forum Swag and Sales Event Photos Sponsors Home

Archive for Toyota Tacoma

2012 On Toyota Tacoma ARB Deluxe Winch Bar

Friday, February 22nd, 2013

ARB Tacoma 220x154 2012 On Toyota Tacoma ARB Deluxe Winch BarDESIGN & DEVELOPMENT:

To allow fitment to the 2012 & On Toyota Tacoma, the previous Tacoma ARB Deluxe Winch Bar had to be redesigned with a number of small changes. The main changes were in the protection tubing to prevent the obstruction of the headlight beam from the updated Tacoma headlight system. Another change had to be made to the top of the bumper. The 2012 On Toyota Tacoma grill hangs further forward which interfered with our previous bumper. This was fixed by adding additional clearance between the ARB bumper and grill and utilizing a trimmed portion of the factory Tacoma bumper. This new bar incorporates all the same features as the previous model. Read More→

Comments (0)
Categories : New Products

180325 1 KIT 220x134 2.4L/2.7L Tacoma/4Runner Rock Ripper™ Extreme Air Intake   50 State LegalReplace your restrictive factory air filter/box with the Rock Ripper™ Performance Line Extreme
Air Intake System. Kits available for 1995-2000 2.7L Tacoma/4Runner, 2001-2004 2.4L
Tacoma and 2001-2004 2.4L or 2.7L Tacoma/4Runner. Read More→

Tacoma 3.4L V6 Rock Ripper Extreme Air Intake 180329 1 KIT 600 220x162 TRAIL GEAR EXPANDS ROCK RIPPER™ LINE WITH NEW EXTREME AIR INTAKE FOR 3.4L V6 TACOMASFresno, CA-Trail-Gear expanded its Rock Ripper™ line with the addition of an Extreme Air Intake for the 1995-1998 3.4L Toyota Tacoma with V6 engine, which it released earlier this month. The Trail-Gear 3.4L V6 Tacoma Rock Ripper™ Extreme Air Intake can also be used on 1995-1998 Toyota 4Runners with the same engine. It will work on both 2-wheel and 4-wheel drive vehicles. This product will allow consumers to stay on the trails longer before vehicle performance drops off due to a clogged filter. Read More→

Comments (0)

Buggy Bulider Kit C 300073 KIT 600 220x207 TRAIL GEAR LAUNCHES BUGGY BUILDERS, EXPANDS TACOMA ARMOR LINE AND DEBUTS AXLE SHAFT COLLARSFresno, CA-Trail-Gear, Inc. released three new products Friday (August 24). The first is a new product they are calling Buggy Builders, designed to help off-road enthusiasts get started building his or her ultimate off-road buggy. Trail-Gear also released armor for the current generation of Toyota Tacomas and an axle shaft collar to eliminate disengagement of the axle shaft from the differential.

Trail-Gear Buggy Builders are bundles of products used for the creation of custom off-road buggies. “The Engineers and the wheelers at Trail-Gear got together to develop three different packages that will allow off-road enthusiasts to build their own custom-designed buggies,” said Bob Herold, Trail-Gear Vice-President of Product Development and Sales. “Our Buggy Builders save customers the time of going to multiple vendors to find what they need and the money of shipping all the pieces individually.” Read More→

Comments (0)

RS7000MT Shock CMYK 480x61 NEW RANCHO® RS7000MT MONOTUBE SHOCKS AVAILABLE  FOR POPULAR 2005 2012 TOYOTA TACOMA TRUCKS LONG BEACH, CA, Aug. 27, 2012 – The Rancho® brand of performance ride control components has recently launched RS7000MT shocks for 2005-12 Toyota Tacoma trucks, including 2WD with Pre-Runner or TRD Off-Road packages and 4WD models. The new monotube shocks are now available at performance retailers nationwide.

Rancho RS7000MT shock absorbers effectively and quickly dissipate heat, providing exceptional resistance to overheating during extreme use. Each Rancho RS7000MT Tacoma shock (RS7319) was engineered using advanced valving, precisely tuned to this application. The shocks help deliver a fast, precise response in both on- and off-road environments for the popular Toyota Tacoma truck model. Read More→

Comments (0)


Friday, July 27th, 2012

Tacoma Armor Pack 300208 1 KIT 220x135 TRAIL GEAR RELEASES ARMOR PACKS FOR TACOMASFresno, CA- Trail-Gear, Inc. is now offering their signature armor for Toyota Tacomas in two new, all- inclusive Armor Packs. These Armor Packs offer customers an even greater savings over Trail-Gear’s already low prices.

The first of the two packs launching today (Friday, July 27), the Tacoma Armor Pack, includes bumper-to- bumper body armor for Toyota Tacomas built during the years of 1995-2004. The kit includes a choice of TG Tacoma Front Bumper, the TG Tacoma Rock Sliders, the TG Tacoma Tube Doors and the TG Tacoma Rear Bumper. All the components are made from heavy-duty 1.75″ x .120″ wall, DOM material to stand up to even the most extreme trail torture. The Armor ships raw and ready to customize. Customers may choose the original front bumper featuring the stinger or the sleek low-profile version and single or extra cab rock sliders. Read More→

PS Pump with Tacoma Serpentine Pulley kit 130329 1 KIT med 220x168 TRAIL GEAR ADDS POWER STEERING PUMP WITH TACOMA SERPENTINE PULLEY KIT TO ROCK ASSAULT™ LINEFresno, CA-In response to customer requests, Trail-Gear has expanded its Rock Assault™ line with the addition of a Power Steering Pump with Tacoma Serpentine Pulley kit, released today (Friday, June 15, 2012).

This new steering kit combines Trail-Gear’s 1,450 PSI or 1,650 PSI power steering pumps with a Tacoma Serpentine Pulley. The TC style power steering pumps feature all steel housings to handle extreme heat and put out 4 GPM or 4.5 GPM of flow and 1,450 PSI or 1,650 PSI of pressure, respectively. Each pump is bench tested to ensure quality. The 1,450 PSI pump is designed for use in a hydraulic ram assist application and the 1,650 PSI pump will run all full hydraulic applications popularly used in rock crawling today. The 1,650 PSI pump has a #6 JIC male fitting on the pressure port and a #10 JIC fitting on the suction side. Read More→

Tacoma 50 State Legal Header

Friday, May 25th, 2012


Rock Ripper™ Tacoma 2.7L Header 180308 1 KIT 220x108 Tacoma 50 State Legal HeaderFresno, CA-Trail-Gear, Inc. has expanded their Rock Ripper™ line with the addition of a 50 State Legal Header for Toyota Tacomas and significantly reduced the prices of the existing headers in the line this week. “We want to offer our customers the best parts at the best prices,” said Matt Messer, CEO at Trail-Gear.

Trail-Gear’s Rock Ripper™ line will now include a 50-State legal header for 1995-1998 2.7L Toyota Tacomas. The Trail-Gear Rock Ripper™ 50 State Legal Tacoma Header features polished, 1/16” thick stainless steel tubes going into a ½” thick header-to-head mounting flange and a stainless steel full-band exhaust clamp. It is TIG welded and polished to give it a clean look. The Trail-Gear Rock Ripper™ 50 State Legal Tacoma Header comes with all gaskets, hardware and full-color installation instructions. It is smog legal in California, thereby making it legal in all 50 states. Trail-Gear headers typically add about 5 horsepower to engine performance. Read More→

Tacoma Cold Air Intake 220x134 TRAIL GEAR EXPANDS ROCK RIPPER™ LINE WITH NEW COLD AIR INTAKE FOR TACOMASFresno, CA-Trail-Gear expanded its Rock Ripper™ line with the addition of a Cold Air Intake for the 1995-2000, 2.7L, 4 cylinder Toyota Tacoma, which it released today (Friday, April 20, 2012). The Trail-Gear Rock Ripper™ Cold Air Intake can also be used on 1995-2000 Toyota 4Runners. This product will allow consumers to stay on the trails longer before vehicle performance drops off due to a clogged filter. Read More→


Fresno, CA-Trail-Gear, Inc. has recently developed and released multiple new products designed for Toyota Tacomas made during the years of 1995-2004. “We see the future of Toyota off- road trending toward Tacomas and we want to offer our customers a complete product line,” said Aaron Young, Trail-Gear Engineer. These new products expand Trail-Gear’s existing Trail Creeper™ and Rock Assault™ lines. Read More→

Trail-Gear Tacoma SAS Kits

Tuesday, April 5th, 2011

2011 04 Trail Gear TacomaSAS 300x174 Trail Gear Tacoma SAS Kits Trail-Gear is proud to be the first in the industry to develop a series of Tacoma SAS Kits for 95-04 Tacomas that are complete, user friendly, and affordable. Trail-Gear has a great respect for the Tacoma and the Tacoma market, so we have dedicated our resources to developing a full line of Tacoma products. Every Tacoma component in these kits have been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. Read More→

Comments (0)

True Tacoma Width Front Axle Housing

Wednesday, March 9th, 2011

2011 03 ToyotaTacomaHousing 300x67 True Tacoma Width Front Axle HousingThis exclusive axle design is the first in the industry to be released with all new parts. Our knuckle balls are forged from 1035 steel, making them much stronger than stock, eliminating closed or bent knuckle balls.

The axle tubes have been offset above the housing centerline, so the inner axles ride near the bottom of the axle tubes rather than in the center. The result is an increase of 3/8″ in ground clearance under the axle tubes. The axle tubes are made from 5/16″ thick 1020 DOM tubing with an outer diameter of 3″. Read More→