1975 Ford Bronco – The Ultimate Off-Road Beast
I haven’t had any bites in six months, so this monster needs to move. Strap in, because this isn’t just a Bronco, it’s a declaration of war against the ordinary.
Under the hood snarls a 302 V8 that thunders like a storm ripping through the backcountry, paired with a bulletproof C6 transmission and a double transfer case that could tow the devil himself out of hell.
This rig rolls on 40” war-drum tires mounted to Dana 60 Ultimate axles front and rear unbreakable, unstoppable, and locked with electric lockers, so you go where you want, not where the trail allows. King Racing Shocks eat rocks and drops for breakfast, while power steering assist makes domination feel effortless.
The extended...
Vehicle Classifieds
4x4 Vehicles for Sale / Wanted
jeep build in 2018 by wide open design
https://www.wideopendesign.com/blog/da-ros-jeep-cj?srsltid=AfmBOoraYzZS2RejkCtFEpp8jfSiOaN-tcEfmxVkyTmgU3z4tewPVBHt
- LS1 engine
- TH400 by Maximum Trasmission
- NP205 T-case with twin stick
- Ford 9" front and rear all 35 spline axle made in 300M
- ARB Lockers front and rear
- 8274 winch with upraded motor
- Radflo coilover
- 42" super swamper tire
- Trail ready wheels
and so much more !!!!
This jeep is built to be very reliable and fun
I'm sellig it just because I'm moving oversee
Price 36000 $
2023 bomber trail chassis lv3 4.3 belt 350 transmission forward pattern 2 speed midnight metalwork, transfer case spider tracked axle shafts, spider track housing Yukon, third member.
And much more of interested contact me, we could go over further details. Also possibly interested in a trade for a daily driver car or truck. Asking 65000 as a good selling price firm
1965 CJ5 5.3 LS out of 06 Yukon aluminum block timed by Polly performance out of Sacramento, Dana 20 twin stick, sm 420 4 speed, wheel base 103" width 85", front axel Dana 44 ARB locker Yukon chromys 5.38 gears rear 14 bolt ff 5.38 gears Detroit locker pinion guard, full hydro steering dual ended big boar ram, disc brakes all around with new calipers pads and master cylinder, 38" creepy crawlers Maxis with true bead lock rims and a spare on rim, ARB onboard air compressor, aluminum radiator, coilovers with remote resivor, Corboe seats with 4 points harness, extra set of half doors, 2 roto pax gas cans mounted to rear tail gate, light bars front and rear, warn winch with synthetic rope, upgraded and larger front drive line and yolks...
FOR SALE: Don Alexander's 2020 Jeep Wrangler
VIN: 1C4HJXDG8LW284253
Here is your chance to own a Jeep Wrangler that has trained many off-roaders over many years
Jeep has spent it's life in Big Bear, CA
Currie Enterprises Complete Front and Rear ends - Heavy Duty
Bilstein Shocks
Rockslide Step Sliders
Raceline Wheels (Including spare)
Hercules TIS Offroad LT315/70R17
Aftermarket bumpers with rear tire carrier
Complete shielding underneath
Heavy duty metal fender wells
CB Radio installed inside
Onboard Air Compressor
Too many other options to list
Smog Certificate in hand
Please let me know if you are interested, Jeep is located near LAX
-Rick
Asking $44,500
All reasonable offers will be considered, Jeep Must Go
Clean and...
FOR SALE 1969 NISSAN PATROL CUSTOM 5.3 LS NEW TH400 TRAN NEW DANA 18 TRANFERCASE NOVAC. FJ 40 AXELS HEAVY DUTY 4 WHEEL DISC BRAKES.ARB LOCKERS FRONT AND REAR .,AUTOMETER GAUGES, ELECTRIC POWER STEERING FOM TOYOTA FJ ,NO RUST ANYWHERE AROUND 600 MILES SINCE BUILD $38,000 HAVE OVER $58,000 IN IT . THIS THING IS FUN TO DRIVE AND 4WHEEL
Trail Tough YJ leaf spring kit, Trail Tough nitro shocks, Trail gear high steer, Electric assist steering, sidekick 511 gears, Longfield chromo axles front and rear. spool rear, torque locker front. Petroworks T-Case 4.89 H pattern. Petroworks Trans rebuild1200 miles, Zuks Off road 1.3 engine rebuild 1500 miles. Harley sidewinder carb kit, bolt in roll cage. Winch with Low rage bumper. Belly skid. Few other odds and ends. Runs great and fun little rig to wheel. Built another rig so this one just sits. Make me a reasonable offer.
2022 JEEP GLADIATOR
3.6 MOTOR
6700 MILES
SUSPENSION LONG ARM KIT, FUSION TIE RODS AND DRAG LINK KIT, KING COIL OVERS WITHKING AIR BUMPS, WOODYS DRIVE SHAFT, PSC HYDRO STEERING, WHEEL LINERS, 5:35 GEARS
MOTOBILT REAR BED, TIRE CARRIER, ACCESSORY LIGHTS, PAINT TO MATCH
MOTOBILT FRONT AND REAR BUMPERS AND POWDER COAT IN BLACK
WINCH AND MOUNT
MOTOBILT FRAME WELDED STEPS
1 TON AXLE SWAP
FUSION KINGPIN D80 REAR 40 SPLINE EATON E LOCKER
FUSION KINGPIN D60 FRONT 35 SPLIN , EATON E LOCKER, NEW SWITCH TO ACTIVATE LOCKERS, FUSION ADJUSTABLE TRACK BAR, 5 KGMC MICKEY THOMPSON BAJA BOSS MT 42 INCH TIRE
TWIN ARB COMPRESSOR AND MOUNT.
THIS THING IS BUILT. NO EXPENSE SPARED
I KNOW I AM MISSING ITEMS...
INTO THIS RIG 140K +
ASKING...
Selling my built cherokee crawler. LS swapped on tons and 43 inch stickies. Axles are superduty axles with 5.38 gears and lockers. Front is all Artec truss and weld on steering. 35 spline. Full stiffeners front to back. Boostwerks steering box brace. 3 link front. 4 link rear stretched 8 inches. Caged. Seats 4 with 5pt safety harnesses. Its my second cherokee. Been a fantastic rig to own. Just looking to move on. $20,000 obo
2015 Jeep Wrangler Rubicon Unlimited (JKUR)
58,000 Miles, Prodigy Turbo-Charger at 42,000 (Prox 360HP 450TQ)
Fusion Dana 80 Rear w/ARB Locker
Fusion Dana 60 Front w/ ARB Locker and 2-1/2- ton aluminum steering
ARB Twin compressor
Smittybilt stand alone for faster air ups
Cooper SST Pros Mud Terrain 40x13.5 x 17” Wheels
Super Heavy drivelines Fr& Rr, 1350 and 1410 U-Joints
PSC Hydro Assist.
JK8 Booster
Metal Tech Bumpers, skids, sliders. & 4-1/2” lift
120/12 volt fridge/freezer installed in D/S Rear Seat area (Seat comes with) with its own Odessey Battery, and direct charging from the alternator
Warn 10K winch, Off-road lights, etc.
Ox Beam Off Road lights Asking $49,950
I’ve owned the TJ since 2005, built like this in 2011. It was built to be Johnson Valley capable; but be liveable on milder trails and the street. It visits JV, Cougar Buttes, Big Bear, Parker, Havasu, Sand Hollow just about every year; Rubicon, Moab or Silverton occasionally. Has been capable and reliable.
Of course, things have happened in 15 yrs of wheeling (rod ends wear and need replacing, PSC parts go bad, sensors need replacement, T-case leaked and needed rebuild), but I’ve only been stuck on the trail twice in all these years (Cam sensor and flat tire). AC & heater work well. Ready for a new owner and a new set of adventures.
$25,000 OBO
Details
Frame: 7.5” frame stretch, 102” wheelbase. The frame stretch (splice) pushes the...
This 92 cab LS engine rebuild is custom made to be the best in Oregon. Features turbo 400 reverse manual valve body 203, 205 transfer case rcv front shafts 538 Youkon gears and spools front and rear brass bushings and bearing eliminator for the front axle 4 linked with aluminum lower links. Sporting 17 in rims with Mickey Thomas 43x14.50-17LT tires. Stack of receipts for this build. Ready for competition.
This is a 2015 Jeep JKU Rubicon that I built and have taken very well care of.
It is in great shape with no problems whatsoever. 40” Cooper STT Pro tires. With the suspension and steering setup it has it drives fantastic. It will do 80 mph down the highway with 1 finger on the steering wheel.
It has leather heated seats with PRP harness and factory seatbelts. Stinger Heigh10 radio along with full Alpine speakers and subwoofer. It also comes with Rockford Fosgate tower speakers and a Rugged radio. Color matching hard top and full doors along with a Bestop Trektop NX soft top and color matching half doors. The floor of the Jeep has bedliner coating. Factory motor, transmission, and transfer case.
Mileage: 66k
SUSPENSION
Rebel Off...
This black-over-black 2022 Jeep Gladiator Rubicon features rock-crawling mods including a bobbed steel bed, a 4.56:1 Advanced Drtivetrain 60 rear axle, hydraulic steering, Anti Rock sway bars, Falcon piggyback shocks, 17″ KMC beadlock wheels with 39″ KM3s, and a Kraken tire inflation system. Its 3.0-liter EcoDiesel V6 has Banks Power engine management and is paired with an eight-speed automatic transmission. The interior has heated front seats, a heated steering wheel, an Alpine sound system, and an 8.4″ touchscreen. The truck was acquired new by me and it has less than 14K miles. This Gladiator is offered accident-free and a clean Colorado title.
Exterior details include a three-piece removable hardtop, a Warn Zeon 10-S front winch...
Ls1 v8, oil pump, timing set, all gaskets, replaced when car was assembled. Improved racing oil pan baffle, 3qt accumulator. CBR dual pass radiator. Holley in tank fuel pump with Holley fuel mat.
Built Th350 reverse manual valve body, 300m input shaft, hardened intermediate sprag race, upgraded case support and low/reverse roller clutch. Refreshed a few months ago with new bushings and clutches. B&M 2500 stall converter. Improved racing trans cooler.
Atlas race case 3.8:1
King 2.5x16 air shocks on all 4 corners tuned for the car.
Spidertrax pro series housings and mid height knuckles, 40 spline spidertrax shafts, Yukon joints, Gearworks HP10 front and rear 5.83 gears. 3x9 PSC rams. Wilwood 4 piston calipers.
Forged RMC beadlock...
Wide Open Design chassis, 1983 Jeep CJ7 body. This is a complete custom buggy build using a Wide Open Design "JC" tube chassis. Front and rear Crane 14 bolt axles built new from Crane Axle/Wide Open Design with ARB air lockers. 4-link suspension features 7075 Aluminum links, QA1 chromoly rod ends, Radflo 2.0 coilovers, Radflow 2.0 bump stops and front and rear Anti-Rock sway bars. Front & rear driveshafts (Canyon Crawler) were custom built by J.E. Reel. Super Swamper TSL SX Stickies are like new (43"x 14.5"x 17") with Raceline bead lock wheels and Power Tank Monster Valves. Also includes spare wheel (same as main wheels) with new Mickey Thomson Baja Pro X tire (43"). Full aluminum skid plates from WOD with 3/4" UHMV custom cut...
This isn’t your average F-150 — this 2019 5.0L Ford F-150 has been professionally built by High Country Performance 4x4 for serious off-road performance and aggressive style. Whether you're tackling trails or turning heads, this truck is ready to perform. Less than 1,100 off-road miles. Title in hand.
SVC Offroad Mid Travel Kit w/ 3.5” King Shocks and coil overs - 16.5" front / 17.0" rear travel
Custom In-House Bed Cage Modifications
SVC Front Bumper
4.5" Fiberwerx Flared Front Fenders & Bedsides
Ford Raptor Rear Axle w/ 4.10 Gearing
KMC KM540 Wheels (18x9 +00)
37x13.50R18 Toyo Open Country Mud Tires
AFE Long Tube Headers & Flowmaster FlowFX Exhaust
ADD Honey Badger Chase Rack
KC Lights Gravity LED Pro 6 Overhead Light Bar System...
$35,000 OBO
No Trades
Off-Road Rock/Sand Dune Crawler Jeep – Custom-built
Built by Tuff Truck Fabrications (Glen Vodry)
Vehicle Dimensions:
88” Wide
88” Tall
15’6 Long
39” Step in height
30” ground clearance
Engine/Drivetrain:
Small block Chevy Vortec motor, fuel injection
Dana front and rear axles
PSC front steering system
Suspension and Lift:
12” plus lift
32” king off-road shocks
Removable sway bars
Bumpers and Accessories:
Rear bumper doubles as an air storage tank.
Front Bumper with WARN 9.5Ti winch
Roll cage and steering:
Full 4x4
Custom Built Roll Cage
Removable steering wheel
Tires and Ground Clearance:
TSL Bogger Super Swampers (42.5x13.5x17LT)
Bead locks
Other Features:
Working AC
Full exhaust...
Jeep cj with a Chevrolet 305 tpi
400 turbo transmission
Atlas twin stick transfer case
4.88 running gears
Dana 60 1 tons
Bead locked tires 40x13.50
(one tire needs to be mounted on the bead lock rim but has a spare wheel on it at the moment same size just not bead locked. I have the bead lock rim with sliced tire on it.)
Under glow lights
Winch
All professionally fabbed up interior with welded cage.
Racing seats with 4 point harnesses
Front and rear brake locks
Runs and drives
Street legal
Just had a kid so it’s time to move into a three seater. Selling my 2024 Sasquatch Motorsport 40 spline car. Everything you’d expect from a 🔴 with so much more. Have well over 200k in the car my loss your gain. Would like cash. Trying to get 170k
Fully tig welded chromoly chassis
6.0 Moruzzi Racing Motor tuned by FTA
Maximum Turbo 400 will billet internals
Atlas transfer case
Holley Dominator management system
Switchpro’s
Full 40 spline spidertrax axles
TubeWorks Crosstie HP billet 3rds (6.10)
Sasquatch custom designed steering system which includes 4” rams front and rear
42” BFG Reds
Uniballs on lower links
TRC coolers all around
Aluminum fuel cell with hydromat
Front and rear winches
Baja design lights everywhere...
1965 Jeep Wagoneer Asking 25,000
complete custom build. 1/4" tube steel frame, 28 gal fuel tank, tool drawer. Comes with everything needed for a bad a$$ ride. Build like a buggy but made for comfort.
6.0 vortec engine 500hp
-BTR camshaft upgrage
-fitech intake
4L80E transmission
1 ton axles
-dana 60 front 5.13 gears with ARB locker- full hydro
-shaved 14 bolt 5.13 gears with ARB Locker
41x13 Irock tires (75%) & nearly full size spare
Tagged until march of next year
rock lights, light bars, rear light bar
Dual batteries
On board welder Premier power welder
ExtremeAire air compressor
ham radio
cb radio
rugged radio
ARB Fridge
spare parts and tools
◦ Front Dana 60 king pin ford Eaton locker
◦ Rear 14 bolt grizzly locker
◦ 5:13 gear ratio
◦ Rear sway bar
◦ Wheel base center to center 111”
◦ RCV knuckles 40 spline big bell
◦ 16” king coil overs with remote reservoir
◦ 4 link, new heims
◦ King bump stops
◦ Reid racing Dana 60 ford king pin knuckles
◦ Full PSC hydro steering with pump
◦ Axels are trussed front and rear
◦ Solid diff covers
◦ Poise spyder front winch bumper
◦ Warn zeon 12-s winch synthetic rope
◦ Rick lights, front flood vision x-lights
◦ TNT rock sliders, poison spyder front and rear fenders
◦ Louvered hood
◦ Roll cage tied to frame
◦...