1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Clutch

Discussion in '4x4 and Truck Tech' started by thumper, Feb 3, 2013.

  1. thumper

    thumper New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Feb 3, 2013
    My throw out bearing keeps going out so fast how can I prevent this from happing
     
  2. woody

    woody eternal noobie Staff Member SWAG Member

    Messages:
    692
    Likes Received:
    122
    Joined:
    Oct 12, 2010
    Location:
    Toquerville UT
    Home Page:
    what pressure plate and disc? IMO, replace them all while in there...lots of good brands out there, my last clutch was a Centerforce and it survived nicely.
     

  3. Satanic Mechanic

    Satanic Mechanic Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Feb 7, 2013
    I agree with woody. I have a centerforce in my 350 powered 55 series and it works great
     
  4. jigs

    jigs New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Feb 13, 2013
    What kind of shape is the pilot bearing in?

    Is the fork properly aligned?
     
  5. woody

    woody eternal noobie Staff Member SWAG Member

    Messages:
    692
    Likes Received:
    122
    Joined:
    Oct 12, 2010
    Location:
    Toquerville UT
    Home Page:
    good point...if the fork isn't aligned properly OR adjusted properly (so the throwout is NOT touching the pressure place fingers when released) it could easily wear out early...