Rig was torn down and rebuilt in May of 2014. It was freshly powder coated and all new paneling was installed. This rig will go anywhere you point it and sound good doing it. It just got all new 35 spline inner and outer chromoly axles, Grizzly locker and wheel bearings and seals. If you have any questions don't hesitate to call or text. Also have videos of it in action. Needs nothing, ready to ride! Possible trade for street rig with A/C. Just looking for something different. $20000 Located in Knoxville TN Call or Text (865) 389-9060
EFI AMC 401
roller top end
synthetic oil only
aluminum radiator
SM465 transmission
Wilwood clutch master and slave
Atlas II 5:1 transfer case
1350 u-joints
Cable twin stick
Tom Woods Driveshafts
Dana 60 front
new 35 spline inner and outer chromoly axles
new Grizzly locker
new wheel bearings and seals
chromoly "heavy duty" drive flanges
Reid racing knuckles with high steer
Plate steel cover
5.13 : 1 gears
1350 u-joint
GM 14 Bolt rear
Disc brake
Detroit locker
Shaved housing
New axle seals
5.13 : 1 gears
Cover guard
Pinion guard
1410 u-joint
* PSC full hydraulic double ended steering ram (new PSC pump)
* 17" x 10" Allied 32 bolt Beadlocks
* 42" Interco Iroks
* 18" -- 2.5" F-O-A remote reservoir coilover shocks
* 2.5" Johnny Joints on all links
* 15 gallon RCI aluminum fuel cell with working gauge
* Warn M8000 winch with synthetic rope
* Wilwood dual master cylinder brake system
* Corbeau Baja XP suspension seats, driver seat on adjustable tracks
* 5 point harnesses
* LED lighting (driving, reverse(cargo), and interior)
* LED halo tail / brake lights
* Automotive safety glass front windshield and back corner glass
* Windshield wipers
* Ducted heater
* Powdercoated chassis
*Rear Winch
EFI AMC 401
roller top end
synthetic oil only
aluminum radiator
SM465 transmission
Wilwood clutch master and slave
Atlas II 5:1 transfer case
1350 u-joints
Cable twin stick
Tom Woods Driveshafts
Dana 60 front
new 35 spline inner and outer chromoly axles
new Grizzly locker
new wheel bearings and seals
chromoly "heavy duty" drive flanges
Reid racing knuckles with high steer
Plate steel cover
5.13 : 1 gears
1350 u-joint
GM 14 Bolt rear
Disc brake
Detroit locker
Shaved housing
New axle seals
5.13 : 1 gears
Cover guard
Pinion guard
1410 u-joint
* PSC full hydraulic double ended steering ram (new PSC pump)
* 17" x 10" Allied 32 bolt Beadlocks
* 42" Interco Iroks
* 18" -- 2.5" F-O-A remote reservoir coilover shocks
* 2.5" Johnny Joints on all links
* 15 gallon RCI aluminum fuel cell with working gauge
* Warn M8000 winch with synthetic rope
* Wilwood dual master cylinder brake system
* Corbeau Baja XP suspension seats, driver seat on adjustable tracks
* 5 point harnesses
* LED lighting (driving, reverse(cargo), and interior)
* LED halo tail / brake lights
* Automotive safety glass front windshield and back corner glass
* Windshield wipers
* Ducted heater
* Powdercoated chassis
*Rear Winch