Here's a new pro mod build for Victor burness

This site earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Dirty36

Spotter Required
Nov 29, 2016
38
Cedar City Utah
Alright so the idea with this build was to use the drivetrain and axles from vics 4600 koh jeep grand Cherokee. 4.0 inline 6 cyl, tf999 auto, and a 180 degree clocked Np 205 for driver drop.
Kingpin 60 up front, and 14 bolt in the rear.
We will be doing a swap to 4 link up front, swapping in full hydro, and adding 4 wheel cutting brakes.
Wheel base will be 108 due to the drivetrain being 72 inches long :(
39 inch bfgs. And a vw hood!
Here's some pictures.....

20170201_113444.jpg


20170309_122734.jpg


20170322_190946.jpg


20170323_000452.jpg


20170323_143946.jpg
 
I had my employee gut the old jeep and help me put the drivetrain on my build table.
I started building at 3pm I called it a night at 1am
Today I worked on it from 10 am to 7 pm.
By tomorrow it will be a roller.
And we should have the new 39 inch bfgs ready to bolt on
 

Users who are viewing this thread

Back
Top Bottom