- Thread starter
- #151
Next up, the mount for the remote brake reservoir.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Believe it or not, Amazon....arguably, pricing was identical everywhere. What you want is the Hydraforce SV10-47A Tandem center.Woody, Where did you purchase your Rear steer valve?
What fuel pump and filter are you using? That is nice and tidy sir. So much work!Ditching the crappy plastic loom and going with split braid...easier routing and much cleaner looking.
View attachment 15397
Re-cut the coil pack mount, needed to add clearance from the engine.
View attachment 15398
Fuel filter/pump bracket is cut and placed....easy access below the passenger seat, good airflow for cooling and well protected.
View attachment 15399
View attachment 15400
View attachment 15401
Amazon product ASIN B002EPUPUOWhat fuel pump and filter are you using? That is nice and tidy sir. So much work!
Nice. I picked this one up, now looking for a new cell now. Mine has a small hole in it I found when I filled it up. It’s 12+yrs old
That's one of my next projects as well. Did you hokle saw/notch it or maybe a large step bit? Any plans to block off the coolant from filling all the way to front bumper? I was thinking of cutting tube in front of nipple and welding in a disk .One of the cooling lines is thru the chassis main rail....no stress at all drilling this 1-3/8 hole - magnet on the backside to catch shavings, looks like it worked perfectly.
1-3/8 hole saw for the forward location, 1-1/2 plus some burr bit work for the rear. Not going to worry about a block off, just bleed the system at an angle. Might add a bleed point at the front later if needed. I'm pleased with how both turned out.That's one of my next projects as well. Did you hokle saw/notch it or maybe a large step bit? Any plans to block off the coolant from filling all the way to front bumper? I was thinking of cutting tube in front of nipple and welding in a disk .