I am selling my 1989 ford bronco because I have to many projects and not enough time! This truck is off road only NO TITLE!!! It has a 351w and an E4OD automatic. The bronco had many custom modifications to it including; About 12" of custom lift sitting on 38.5x16 R15 TSL bias ply tires with a lot of tread!
The front is of the bronco has 12" travel fox air shocks, "long arm" radius arms for a 1979 bronco from james duff, a solid front Dana 44 axle out of a 1979 bronco with 4.56 gears and a Detroit locker and chromoly axle shafts, Yukon chromoly fail to lock hubs, customer made trac bar and mounts, D.O.M. tubing and hiem joint steering links witch is bent from hitting some rocks
The back is 6" lift bronco spring with a shackle flip...
105'' wheel base 2 seater
4.3 vortec bored 60 over -cpi injected hi-flow spider -hughes racing turbo 350 trans. input shaft and clutch upgrades - single transfer case /Toyota gear drive with marlin shafts 4.7 and twin stick shifters
8'' Toyota axles with six shooter knuckles ,arp studs chromoly drive flanges -longfield axles ,Detroit lockers - g-2 , 5:29 gears - rear trailgear disc brake kit -braided brake lines . 4 link front and rear full hydro steering -single ended ram . 13.50 39.5 x 17'' iroks on allied bead lock wheels . art carr shifter corbau seats5 point harness's -16'' fox air shocks -front and rear suck down winches with synthetic rope foam filled fuel cell 18 gallon . weighs 3340 lbs. 74'' wide with spacers .smooth skid...
Started out as a 1985 Toyota SR-5 XTRA CAB 4x4
See link for photos: http://s1175.photobucket.com/user/Dirtypower1960/slideshow/
Chassis:
118" wheelbase
White
1985 Toyota SR-5 XTRA CAB 4x4
Engine:
Chevy 350
Howell Fuel Injection with Wire Harness
Flat Top Pistons
Comp Camshafts
Aluminum radiator w/ dual SPAL 14" Electric Fans
Aluminum Fuel Cell
Transmission:
700R
Tranny Cooler w/ 9" Fan
B&M Shifter
Transfer Case:
Marlin Crawler Dual Case Kit with the 4:70:1 Gear, 23 Spline
Drive Shafts:
Tom Woods Front
Tom Woods Rear 3" Tube 1350 Joint w/CV
Front Axle:
GM Dana 60 35 Spline 4340 Axles w/733 U-Joints
Yukon 5.13 Ring and Pinion
Yukon Locker
Yukon Hardcore Locking Hubs 35 Spline
Heavy Duty Differential Cover
Rear Axle:
GM 14 Bolt...
Built crawler ford 302 465 Manuel trans np205 t case twin stick Rockwells front and rear steer leaf spring front 1 link rear cut 44 boggers with bead locks 9500 lbs winch winch needs plug but works $15000 located in Norman Oklahoma can send pics they won't load
Allen- 909-435-5698
$44,000
The Truck is fully prepped and updated with many NEW part( Engine - New Kings
- New King steering stabilizer shocks
- 4 wheel drive
- New 39' BFGs ( not dot rated ) Race Tires ( approx. 400 miles on current set of 4-spare is new)
- New Spare with 2 ton aluminum Jack mounted in rear
- Mega Audio + TV / DVD --Surround Sound
- Power Inverter to 110
- Road Armor Bumpers (front & rear)
- LED equipt + Light Bar
- New Steering Arms
- Equipment Box
- Navigation (new)
- Bump Stops
- Bluetooth
- Brand New Storage Rack
- New Tow Strap & Shackles
- New 5 Point Seat Harness's
- New off road "Jack" and rear mount
- 1 Owner Carfax ( clean, no accidents)
- Complete Service History
- One off 8 " custom List by Scalzo...
3 seater buggy chevy 4.3 built 350 trans 205 t case yota diffs with longfield inner and outer shafts 4.88 gears locked front and rear 3 link front 4 link rear 38 inch swampers with bead locks corbeau seats with harness this is a point and go rig has slow leak at the rear seal of the tranny but wheels fine $13500 obo located in Norman Oklahoma
I'm new to the rock crawling scene, and have ran across this 2002 TJ doing some trading in it and need knowledgeable opinions on what it's worth. Any help would be appreciated! Thanks
Its a point and shoot TJ that you can drive 70mph to the trail, beat on it all day then drive home. The full hydro takes some getting use to on the road but its never bothered me. I dont have a rear seat but I built the cage with head room for one if you wanted to move the cell and swag racks. Under the skin its more like a buggy with the engine cage tied to the fenders, grill hoop, rockers. The cage is tied to the frame and rockers in 8 spots as well.
2002, 44k miles. 4.0. 3 speed auto.
-StaK 3 speed monster box.
-dana 60. ARBs. All Yukon 35 spline...
20 Inch RTX Crawler Wheels ($999.99 for 4 Rims)
SIZE : 20 x 9
BOLT : 8x170
Offset: +18 mm
Color : Matte Black
Hub: 130.1 mm
Suitable for:
8x170: Ford F250, Ford F350, Ford Excursion, single rear wheel only. No Duallys
NEW TIRES available for EXTRA $$
275 / 60 R20 -- $900
275 / 65 R20 -- $1200
Thanks
______________________________________________________implant
2000 Jeep Cherokee Sport 4dr 4x4 for sale:
240,000 km
5-speed manual tranny
No rust
New A/C compressor 2014
New front coils 2015
Oil changed every 7,000 km (every spring and fall)
New Sony radio and speakers
Winter tires and steel wheels included
No rust, extremely clean inside
All maintenance bills available
Mileage 90% highway
Original owner, more photos available by email.
As title. Looking for something ready to go.
Get travel to . Got around a grand to spend for the right car
----------------------------------------------------------------------------------
How should it feel for Chinese tourists bringing home MADE IN CHINA souvenirs from any country they visit...
91' Samurai, has the 03 Suzuki 2.0 (127hp) FI motor swap with Header, TH 180 Automatic Transmission, Ballistic transfer case mount, 6 to 1 Transfer case gears, Aluminum Fab Dash w/Autometer Ultralite gauges, Dana 44's Front & Back with ARB Air lockers and on-board compressor, 4.56 Gears, 10 Gallon stainless fuel cell, Full roll cage, aftermarket bumpers front & back, Rock Sliders, removable steering wheel, Hydro Steering, fabbed inner quarters in rear, Beadlocked wheels with 36x12.50x15 Super Swapers, new CD Player & Kicker 6.5" speakers, Warn headlights, Racing seats with Impact 5 point harnesses, new Rough Country N2.0 nitrogen shocks, Jeep Eater YJ suspension conversion, new Warn Premium hubs, 9000lb winch, and im sure im leaving out...
wish to sell to any person who will rebuild it,repaint it,and keep it on the road where it belongs.
i need a down payment on a small house in town.i retired and cant finish the project. it runs good, needs tlc and and a good home
the asking price is $16,998 cash or trade
Upload pictures The systems forces to wait. Probably my error...will be update later
More detail PM me with your number nha copo
1979 CJ-5 Stretched 20 inches
rebuilt 304
14 bolt rear / 44 front with refinished beadlocks and 40in Super Swampers
full cage to the frame
twin stick transfer case
isn't registered, but could be
Located north of Atlanta Ga
Starts right up, call or text is best 4o4-384-0505 make an offer, may trade for a 4x4 UTV
Thanks
This is a 1947 Willys cj2a jeep done over. Too much to list, but alot of good stuff. Mid 80s 302 small block v8 completely rebuilt by Ace Altenators,(thing sounds like a race motor)with maybe 150 miles on it,c4 tranny, lockered front and back, 5.38 gears, on board welder, brand new never used Warn winch, Dana 44 axles, 35″ tires. Custom dash. A little TLC never hurts. Im an open book kinda guy, so it has a tranny leak when not installed back properly but absolutely nothing wrong with tranny. Need to get rid of for home renovation. Great jeep and great for modifying even more!$13,800 OBO. Make me an offer Im open to them! Thanks for looking!
BUILT NEW IN 'O8, NEVER EVENT-ED WITH IT, JUST LOCAL TRAILS. NEVER ROLLED. NICE AND STRAIGHT. COMES WITH CONTROL ARMS, FOUR LINK FRONT AND REAR SET-UP FOR COIL OVERS. HAD 4.3 VORTEC WITH T 400 AND ATLAS, SKID PLATE SUSP. PAN, FLOORS, BREAK PEDDLES, AND MASTER CYLINDERS, SEATS, 350 VORTEC WIRING COMP. AND ITS SET-UP WITH EDELBROCK PROJECTION AND ALUMINUM RADIATOR AND FAN.
(im posting this for my boyfriend. im sorry if some of it makes no sense, im doing the best to read what he's written. lol)
CHASSIE ALONE $2,000 O.B.O
CHASSIE AND ENGINE WIRING $2,750 O.B.O
PLEASE CALL ERIC ANYTIME AT 425-530-9120 FOR MORE INFORMATION!!
Corvette fuel injected motor
Auqa aluminum tub
Atlas transfer case
60 front
14 bolt rear
4 link suspension front & rear (built by professional off road shop)
Coil overs, Fox shocks, bump stops
Fuel cell w/rack V air (on board air) Ron
Davis radiator w/dual fans
Frame mounted roll cage
Suspension seats w/belts
Hi lift jack
40" tires bead locks
8274 Warn winch w/synthetic rope
Currie anti-rock sway bars front & rear
513 gears
Detroit lockers
PSC hydraulic steering
fresh build, needs nothing
Call 812-707-3133 for more information or additional pictures
$32,500 OBO
Only selling so I can buy a friends buggy...$8500 or $7500 without tires and wheels
Built by Clayton Off road and unlimited Motorsports...
91 Jeep Cherokee
Engine
4.0
ax15 with new heavier flywheel and Kevlar clutch
np231 case hd slip yoke eliminator
Axles
Front Dana 60 high pinion 538 gears arb airlocker 35 spline inner and 35 spline outer chromoly shafts with rock crusher drive flanges and rock crusher diff cover new brakes complete high steer all new bearings
Rear Dana 60 538 gears full spool
rock crusher diff cover
Tires and Wheels
40x13.5x18 Baja Claw Stickys (5)
18" Trailready Double Beadlocks
Suspension
Clayton long arm front all Clayton brackets on front 60
Custom Clayton 4 link kit long arm front and rear
Clayton...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.